Using Keysight N6900 and N7900 Series DC power supplies from MATLAB
The Instrument Control Toolbox supports communication with instruments using instrument drivers or through SCPI commands over supported interfaces such as GPIB, TCP/IP, Serial or VISA.
This links to an IVI instrument driver for use with v3.0 of the Instrument Control Toolbox™ and higher. This driver is for use with Keysight N6900 and N7900 Series DC power supplies.
For additional information, see:
Vendor
Keysight
Instrument Type
power supply
Models Supported
N6950A, N6951A, N6952A, N6953A, N6954A, N6970A, N6971A, N6972A, N6973A, N6974A, N7950A, N7951A, N7952A, N7953A, N7954A, N7970A, N7971A, N7972A, N7973A, N7974A, N6976A, N6977A, N7976A, N7977A, N6991AT, RP7951A, RP7961A, RP7952A, RP7962A, RP7953A, RP7963A, RP7951AT, RP7952AT, RP7931A, RP7932A, RP7933A, RP7934A, RP7936A, RP7941A, RP7942A, RP7943A, RP7944A, RP7945A, RP7946A, RP7972A, RP7973A, RP7978A, RP7979A, PV8921A, PV8922A, PV8931A, PV8932, RP7983A, RP7982A, N69143A, N69145A, N69146A, N69172A, N69173A, RP7984A
Driver Type
IVI
