Remote Server IP port number
IP port number of Modbus client device on TCP/IP network
Since R2022a
Model Configuration Pane: Hardware Implementation
Description
Add-On Required: This feature requires the MATLAB Coder Support Package for NVIDIA Jetson and NVIDIA DRIVE Platforms add-on.
The Remote Server IP port number parameter specifies the IP port number of the Modbus® client device connected on the TCP/IP network to communicate between the
client and server devices. For example, if the remote server device(s) are connected to
port number 502, the client device must communicate only on this port
with the server device(s) for establishing a
successful communication.
Note
Specify the same port number for the Remote Server IP port number and Local IP port number parameters for the client and server device(s) to communicate successfully.
Dependencies
To enable this parameter, set Mode
to Client.
Settings
502 (default) | positive integerEnter the IP port number of the client device connected on the TCP/IP network to communicate between the client and server devices.
Programmatic Use
| You cannot set this parameter from the MATLAB® command line. |
Version History
Introduced in R2022a
