Analog Devices ADALM-PLUTO Radio Parameters and Supported Ranges

Since R2026a

To configure Analog Devices® ADALM-PLUTO radios, you need to set the parameters so that the hardware can tune and transmit or receive the signals.

This topic lists the key parameters of Analog Devices ADALM-PLUTO supported by Communications Toolbox™ Support Package for Analog Devices ADALM-Pluto Radio and shows the valid ranges.

Center Frequency

Center frequency is the frequency at which the Analog Devices ADALM-PLUTO radio transmits or receives signals.

ParameterValid Range
Center Frequency70 MHz to 6 GHz

Gain

Gain determines the level of amplification applied to the signal. In case of receive gain, the value range depends on the center frequency. Additionally, you need to set the GainSource property to "Manual".

ParameterValid RangeGain Resolution
Rx Gain

  • -1 to 73 dB (70 MHz to 1300 MHz)

  • -3 to 71 dB (1300 MHz to 4 GHz)

  • -10 to 62 dB (4 GHZ to 6 GHz)

1 dB

Tx Gain

-89.75 to 0 dB

0.25 dB

Baseband Sample Rate

The AD9361/AD9364 RF chip on the ADALM-PLUTO radio hardware allows you to configure the baseband sampling rate and the filter chains. For more information, see Baseband Sampling Rate and Filter Chains

ParameterValid Range
Baseband Sample Rate

65105 to 61.44e6 samples per second.

See Also

| | |

Topics