在目标硬件上运行
在设计 RTL-SDR 模型后，您可以生成可执行文件以在目标硬件上进行验证和测试。您可以在外部硬件上以外部模式或作为独立应用程序运行此文件。
要使用 RTL-SDR 硬件和目标硬件成功执行 SDR 模型，您必须安装以下软件：
Communications Toolbox™ Support Package for RTL-SDR Radio（适用于所有目标硬件）
Simulink® Support Package for Raspberry Pi Hardware（适用于 Raspberry Pi 硬件）
Embedded Coder® Support Package for BeagleBone Black Hardware（适用于 BeagleBone Black 硬件）
有关硬件要求和任何其他软件要求，请参阅每个支持包的文档。
注意
仅 Simulink 支持此功能。
主题
- Signal Monitoring and Parameter Tuning
Use Simulink Monitor Signals & Tune Parameters feature (also called External Mode) to connect your Simulink block diagram to your application that runs the model on the target hardware.
- Run Model as Standalone Application
You can prepare, configure, and run a model on your target hardware.
相关信息
- Raspberry Pi 硬件 (Simulink)
- BeagleBone Black (Embedded Coder)
精选示例
Airplane Tracking Using ADS-B Signals with Raspberry Pi and RTL-SDR
Create a remote sensing station that tracks planes using a Raspberry Pi and RTL-SDR radio, deploying a Simulink model to process automatic dependent surveillance-broadcast (ADS-B) signals.
FM Reception with RTL-SDR Radio on Raspberry Pi Hardware with Simulink
Build an FM mono receiver with a Raspberry Pi and RTL-SDR radio, deploying a Simulink model to process FM broadcast signals and play the audio through the Raspberry Pi's speaker.
