Standards-Based Modeling

Build an FM mono or stereo receiver using captured signals or real time received signals.

Build an FM mono or stereo receiver using captured signals or real time received signals.

Extract program or song information from FM radio stations using the RDS or RBDS standard and, optionally, the RadioText Plus (RT+) standard. You can use a previously captured signal, or receive signals over-the-air in real time using an RTL-SDR radio, an ADALM-PLUTO radio, or a USRP™ radio.

Extract program or song information from FM radio stations using the RDS or RBDS standard and, optionally, the RadioText Plus (RT+) standard. You can use a previously captured signal, or receive signals over-the-air in real time using an RTL-SDR radio, an ADALM-PLUTO radio, or a USRP™ radio.

Retrieve information about WiFi networks on the 5 GHz band using a software-defined radio.

Generate a reference measurement channel (RMC) downlink (DL) LTE waveform suitable for over-the-air transmission. This example also shows how to use a software-defined radio (SDR) to transmit the generated waveform using single or multiple antennas.

Recover the master information block (MIB) and basic system information from an over-the-air LTE downlink (DL) waveform. This example also shows how to receive an LTE waveform using a software-defined radio (SDR) with single or multiple antennas.

Track ships by processing automatic identification system (AIS) signals. You can use previously captured signals or receive signals in real time using an RTL-SDR radio, an ADALM-PLUTO radio or a USRP™ Radio. You can also show the tracked ships on a map using the Mapping Toolbox™.

Track planes by processing automatic dependent surveillance-broadcast (ADS-B) signals. You can use previously captured signals or receive signals in real time using an RTL-SDR radio, ADALM-PLUTO radio or USRP™ radio. You can also visualize the tracked planes on a map using Mapping Toolbox™.

Track planes by processing automatic dependent surveillance-broadcast (ADS-B) signals. You can use previously captured signals, or receive signals in real time using an RTL-SDR radio, an ADALM-PLUTO radio or a USRP™ radio. You can also visualize the tracked planes on a map with Mapping Toolbox™.