Getting Started Acquiring Data with Digilent Analog Discovery

Open Script

This example shows you how to acquire voltage data at a rate of 300 kHz. The input waveform is a sine wave (10 Hz, 2 Vpp) provided by an external function generator.

Create a DataAcquisition for a Digilent Device

Discover Digilent devices connected to your system using daqlist.

daqlist("digilent")
dq = daq("digilent")

ans =

  1×4 table

    DeviceID                     Description                            Model                  DeviceInfo       
    ________    _____________________________________________    ____________________    _______________________

     "AD1"      "Digilent Inc. Analog Discovery 2 Kit Rev. C"    "Analog Discovery 2"    [1×1 daq.di.DeviceInfo]


dq = 

DataAcquisition using Digilent Inc. hardware:

                     Running: 0
                        Rate: 10000
           NumScansAvailable: 0
            NumScansAcquired: 0
              NumScansQueued: 0
    NumScansOutputByHardware: 0
                   RateLimit: []

Show channels
Show properties and methods

Add an Analog Input Channel

Add an analog input channel with device ID AD1 and channel ID 1. Set the measurement type to Voltage.

ch_in = addinput(dq, "AD1", "1", "Voltage");

Set DataAcquisition and Channel Properties

Set the acquisition rate to 300 kHz. The default range is -25 to 25 volts.

ch_in.Name = "AD1_1_in"
rate = 300e3;
dq.Rate = rate;
ch_in

ch_in = 

    Index    Type    Device    Channel    Measurement Type          Range              Name   
    _____    ____    ______    _______    ________________    __________________    __________

      1      "ai"    "AD1"       "1"      "Voltage (Diff)"    "-25 to +25 Volts"    "AD1_1_in"

Acquire a Single Sample

Acquire a single scan on-demand, displaying the data and trigger time.

[singleReading, startTime] = read(dq)

singleReading =

  timetable

    Time     AD1_1_in
    _____    ________

    0 sec    -0.37211


startTime = 

  datetime

   21-Nov-2019 16:56:50.631

Acquire Timestamped Data

Acquire a set of clocked data for one second.

[data, startTime] = read(dq, seconds(1));

Plot Acquired Data

plot(data.Time, data.AD1_1_in);
xlabel('Time (s)');
ylabel('Voltage (V)');
title(['Clocked Data Triggered on: ' datestr(startTime)]);