Main Content

Wait for a start packet from the host before execution

Option to delay start of execution until start packet is received from host computer

expand all in page

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / External mode

Description

The Wait for a start packet from the host before execution parameter enables a delay of the start of execution until the hardware board receives a start packet from the host computer.

Dependencies

None

Settings

on (default) | off

When enabled, delay the start of execution until the hardware board receives a start packet from the host computer.

Examples

expand all

  1. In the Simulink® Editor, select Simulation > Model Configuration Parameters.

  2. In the Configuration Parameters dialog box, click Hardware Implementation.

  3. Set the Hardware board parameter to TI Hercules RM57Lx Launchpad and click Apply.

    The parameter values under Hardware board settings are automatically populated to their default values.

  4. From the External mode group, enable the Wait for a start packet from the host before execution option and click Apply.

  5. Click OK to close the dialog box.

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2006a

See Also