Main Content

Digital Port Read Peripheral Configuration

Map Digital Port Read peripherals in the Infineon AURIX model to peripheral registers in the MCU

Since R2024a

expand all in page

Description

View and edit the assignment of ports and pins in the Infineon® AURIX™ model to the hardware peripherals.

Using the Peripheral Configuration for Digital Port Read, you can:

  • View and edit the assignment of ports and pins.

  • Check your model for any conflicts between peripherals.

Digital port read peripheral

Open the Digital Port Read Peripheral Configuration

  • In the Simulink toolstrip, go to Hardware tab and click Hardware Mapping.

    Hardware Mapping

Parameters

expand all

Basic

Select the port number of digital read peripheral P00 through P40 on the hardware board. The available ports depends on the package class and pinout selection in the Configuration Parameters.

Select the pin number for the selected digital read port ranging between 0 through 14 on the hardware board.

The Select pin # is the number of pins configured in the respective digital read block.

Advanced

Select the input mode for the pin(s).

Note

The configuration made in Advanced tab is applicable for all the pins selected in the Basic tab.

Select the pin speed.

Note

The configuration made in Advanced tab is applicable for all the pins selected in the Basic tab

Select the pin voltage level.

Note

The configuration made in Advanced tab is applicable for all the pins selected in the Basic tab

Version History

Introduced in R2024a

See Also

| |