建模
为硬件连接准备模型，添加模块以支持硬件协议
适用于 AMD® SoC 设备的模块和仿真功能。
模块
| AXI4-Interface Read | Read data from IP core on AMD SoC Device |
| AXI4-Interface Write | Write data to IP core on AMD SoC Device |
| Linux Task | Spawn task function as separate Linux thread |
| UDP Receive | Receive UDP data |
| UDP Send | 发送 UDP 报文 |
| VxWorks Task | Spawn task function as separate VxWorks thread |
| AXI4-Stream IIO Write | Write AXI4-Stream Data using IIO |
| AXI4-Stream IIO Read | Read AXI4-Stream Data using IIO |
模型设置
函数
zynqlib | 打开 Simulink 库浏览器以定位到 Embedded Coder Support Package for AMD SoC Devices 模块库 |
精选示例
Communicate with AMD Zynq Boards Using UDP Protocol
Send data from a Simulink® model running on an ARM® Cortex®-A processor in an AMD Zynq® platform to another model running on the host computer by using the UDP ethernet protocol.
Basic Control Algorithm Partitioned into FPGA and ARM
Models a field-oriented controller (FOC) for a permanent magnet synchronous machine (PMSM) on the AMD Zynq® UltraScale+™ MPSoC target. This example uses the Trenz Electronic™ Motor Control Development Kit TE0820 revision 4. If you do not have the required hardware, you can use this example to help you develop a controller for your own hardware configuration.
