信号监控和参数调节
通过使用主机和目标之间的外部模式通信，监控 Renesas RA 微控制器上的信号并调节参数。将您的 Simulink® 模型作为生成的 C 代码部署，并在调整参数时实时流式传输信号数据，而无需重新生成代码。
您可以为 Renesas RA 微控制器生成优化代码，并使用 Embedded Coder 执行实时信号监控、参数调节和处理器在环 (PIL) 测试。
主题
- Configuration for Monitor & Tune and PIL for Renesas RA Microcontrollers
Monitor signals, tune parameters, and validate generated code on Renesas RA microcontrollers using External mode and processor-in-the-loop (PIL) workflows.
精选示例
Test Generated Code with PIL Simulations on Renesas RA Microcontrollers
Use the Embedded Coder ® Support Package for Renesas® RA Microcontrollers to generate code from Simulink models and perform Processor-in-the-Loop (PIL) simulations on the Renesas RA6T2 board. You can run this workflow using either the SIL/PIL Manager or command-line approach. PIL verification is a key step in validating that the generated code, when executed on actual hardware, replicates the behavior of your original Simulink design. For more information, see 选择 SIL 或 PIL 方法 and SIL/PIL 管理器.
Execution Time Profiling of Field-Oriented Control (FOC) Algorithm Using PIL on Renesas RA Microcontrollers
Use the Embedded Coder® Support Package for Renesas® RA Microcontrollers to perform Processor-in-the-Loop (PIL) profiling of a Field-Oriented Control (FOC) motor control algorithm on the Renesas MCK-RA6T2 hardware board. In PIL simulation, the control algorithm executes on the target hardware while the plant model runs on the host machine. This configuration enables you to measure and compare execution times, as well as verify numerical equivalence between simulation and hardware implementations.
