Configure Holding registers
Configure starting address and number of holding registers
Model Configuration Pane: Hardware Implementation / Hardware board settings / Target hardware resources / Groups / Modbus properties
Description
Select this parameter to configure the starting address and number of holding registers.
Dependencies
To enable this parameter, set Mode to
Server.
Settings
On (default) |
Off| Parameter | Description | Default Value |
|---|---|---|
| Start address | Starting address of the holding register. Dependencies: To enable this parameter, select Configure Holding registers. | 0 |
| Quantity | Number of holding registers. Dependencies: To enable this parameter, select Configure Holding registers. | 1 |
Recommended Settings
No recommendation.
Programmatic Use
| No programmatic use is available. |
Version History
Introduced in R2021a
