LSM303C IMU Sensor

R2026b

Measure linear acceleration, magnetic field strength, and temperature from LSM303C sensor

Since R2022b

expand all in page
  • block icon for LSM303 IMU sensor

Libraries:
Raspberry Pi Blockset / Sensors / IMU Sensors

Description

The LSM303C IMU Sensor block outputs the values of linear acceleration and magnetic field strength along x-, y- and z- axes as measured by the LSM303C sensor connected to Raspberry Pi® board. The block also outputs the temperature as read by the LSM303C sensor.

Note

To generate C/C++ code for this block, you must have an Embedded Coder® license.

Ports

Output

expand all

Linear acceleration (in m/s2) measured by LSM303C sensor connected to Raspberry Pi board, along the x-, y- and z- axes, specified as a row vector [x,y,z].

Dependencies

This output port appears only if you select the Acceleration (m/s2) parameter.

Data Types: double

Magnetic field strength (in µT) measured by LSM303C sensor connected to Raspberry Pi board, along the x-, y- and z- axes, specified as a row vector [x,y,z].

Dependencies

This output port appears only if you select the Magnetic Field (µT) parameter.

Data Types: double

Temperature (in ℃) measured by LSM303C sensor connected to Raspberry Pi board.

Dependencies

This output port appears only if you select the Temperature (℃) parameter.

Data Types: double

Status of acceleration value along the three axes, specified as a row vector in the order [z,y,x], to indicate if the data read is the new value or not. 0 indicates that the data read is new and 1 indicates that the data read is not new.

Dependencies

This output port appears only if you select the Acceleration Status parameter.

Data Types: Boolean

Status of magnetic field value along the three axes, specified as a row vector in the order [z,y,x], to indicate if the data read is the new value or not. 0 indicates that the data read is new and 1 indicates that the data read is not new.

Dependencies

This output port appears only if you select the Magnetic Field Status parameter.

Data Types: double

Parameters

expand all

Main Tab

Specify the module on the board that you are using for I2C communication.

Select this parameter to set Acceleration as one of the output ports.

Select this parameter to set Magnetic Field as one of the output ports.

Select this parameter to set Temperature as one of the output ports.

Select this parameter to set Acceleration Status as one of the output ports.

Select this parameter to set Magnetic Field Status as one of the output ports.

Specify how often this block reads the data from the LSM303 sensor. When you set this parameter to -1, Simulink determines the best sample time for the block based on the block context within the model.

Advanced Tab

Select the full scale for measuring linear acceleration (the range of acceleration that the sensor needs to measure).

Select the output data rate at which accelerometer data is sampled, which also determines the bandwidth.

Select the full scale for measuring magnetic field.

Select the output data rate at which magnetometer data is sampled.

Programmatic Use: Add Block

To add the block programmatically, use the add_block function with one of these library block paths as the source.

"raspberrypiIMUsensorslib/LSM303C IMU Sensor"

Example: add_block("raspberrypiIMUsensorslib/LSM303C IMU Sensor","myModel/myBlock",MakeNameUnique="on")

Extended Capabilities

expand all

Version History

Introduced in R2022b

See Also

Topics