Configure Input registers
Configure the starting address and the number of input registers
Since R2024b
Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / Modbus
Description
Select the Configure Input registers parameter to configure the starting address and the number of input registers.
Dependencies
To enable this parameter, set Mode to server.
Input Register Parameters
| Parameter | Description | Default Value |
|---|---|---|
Start address | Starting address of the input register Dependencies: To enable this parameter, select Configure Input registers. | 0 |
| Quantity | Number of input registers Dependencies: To enable this parameter, select Configure Input registers. | 1 |
Settings
on (default) |
offSelect this parameter to configure the starting address and the number of input registers.
Recommended Settings
No recommendation.
Programmatic Use
| No programmatic use is available. |
Version History
Introduced in R2024b
