MAC Address

Specify the media access control (MAC) address

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / Ethernet

Description

The MAC Address parameter specifies the media access control (MAC) address, the physical network address of the board.

Settings

A8-63-F2-80-90-80 (default)

Specify the media access control (MAC) address, the physical network address of the board.

Under most circumstances, you do not need to change the MAC address. If you connect more than one board to a single computer so that each address is unique, change the MAC address. You must have a separate network interface card (NIC) for each board.

To change the MAC address, specify an address that is different from the address that belongs to any other device attached to your computer. To obtain the MAC address for a specific board, refer to the label affixed to the board or consult its documentation.

The MAC address must be in the six octet format. For example, DE-AD-BE-EF-FE-ED

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2016b