Piecewise Linear Current Source

R2026b

Time-dependent current source using lookup table

expand all in page
  • Piecewise Linear Current Source block

Libraries:
Simscape / Electrical / Sources
Simscape / Electrical / Additional Components / SPICE Sources

Description

The Piecewise Linear Current Source block represents a current source that you specify in lookup table form using a vector of time values and a vector of the corresponding current values. You must specify at least two time-current value pairs. The block generates a time-dependent current based on these time-current values using the selected interpolation and extrapolation methods. You have a choice of two interpolation methods and extrapolation methods. The output current is independent of the voltage across the terminals of the source.

The block uses a small conductance internally to prevent numerical simulation issues. The conductance connects the + and - ports of the device and has a conductance GMIN:

  • By default, GMIN matches the GMIN parameter of the Environment Parameters block, whose default value is 1e–121/Ohm.

  • To change GMIN, add an Environment Parameters block to your model and set the GMIN parameter to the desired value.

Examples

Use of Peltier Device as Thermoelectric Cooler

Use of Peltier Device as Thermoelectric Cooler

A Peltier device working in cooling mode with a hot side temperature of 50 degC. In cooling mode, the Coefficient of Performance (COP) of the Peltier cell is equal to the total heat transferred through the Thermoelectric cooler (TEC) divided by the electric input power, COP = Qc/Pin.

Assumptions and Limitations

The Piecewise Linear Current Source block does not support energy accounting. If you try to get energy information for this block using the getEnergyInfo function, the function generates an error message.

Ports

Conserving

expand all

Electrical conserving port associated with the piecewise linear current source positive terminal.

Electrical conserving port associated with the piecewise linear current source negative terminal.

Parameters

expand all

Vector of time values as a tabulated 1-by-n array. The time values vector must be strictly monotonically increasing.

Vector of current values as a tabulated 1-by-n array. The current values vector must be the same size as the time values vector.

Select the method that the block uses to determine the output current values at intermediate time points that are not specified in the preceding vectors:

  • Linear — Prioritize performance by using a linear function.

  • Smooth — Prioritize accuracy by producing a continuous curve with continuous first-order derivatives.

Select the method that the block uses to determine the output current values at time points that are outside the time range specified in the preceding vectors:

  • Nearest — Select this option to use the nearest input value for extrapolation.

  • Linear — Select this option to use a linear function.

Specify if the current source includes a parallel conductance. The value of the parallel conductance, GMIN, depends on whether your model contains an Environment Parameters block.

This table shows the possible values of the parallel conductance, GMIN:

Values of parallel conductance, GMIN

Include parallel conductance, GMIN
YesNo
Model contains Environment Parameters blockModel does not contain Environment Parameters blockParallel conductance, GMIN, is not included and it does not affect the current source.
GMIN is equal to the value of the GMIN parameter in the Environment Parameters block.GMIN = 1e-12 Ohm

References

[1] D. Kahaner, Cleve Moler, and Stephen Nash Numerical Methods and Software. Prentice Hall, 1988.

[2] W.H. Press, B.P. Flannery, S.A. Teulkolsky, and W.T. Wetterling. Numerical Recipes in C: The Art of Scientific Computing. Cambridge University Press, 1992.

Extended Capabilities

expand all

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced in R2008a

See Also

Simscape Blocks

Functions

Topics