Flow Resistance (TL)

General resistance in a thermal liquid branch

Libraries:
Simscape / Foundation Library / Thermal Liquid / Elements

Description

The Flow Resistance (TL) block models a general pressure drop in a thermal-liquid network branch. The pressure drop is proportional to the square of the mass flow rate. The constant of proportionality is determined from a nominal operating condition specified in the block dialog box.

Use this block when the only data available for a component is the typical pressure drop and flow rate. This block is useful for representing complex components, where it is difficult to determine theoretical pressure loss from the geometry.

Mass Balance

The volume of fluid inside the flow resistance is assumed to be negligible. The mass flow rate in through one port must then exactly equal the mass flow rate out through the other port:

${\dot{m}}_{A} + {\dot{m}}_{B} = 0,$

where ${\dot{m}}_{A}$ and ${\dot{m}}_{B}$ are defined as the mass flow rates into the component through ports A and B, respectively.

Energy Balance

Energy can enter and leave the flow resistance through the thermal liquid ports only. No heat exchange occurs between the wall and the environment. In addition, no work is done on or by the fluid. The energy flow rate in through one port must then exactly equal the energy flow rate out through the other port:

$ϕ_{A} + ϕ_{B} = 0,$

where ϕ_A and ϕ_B are the energy flow rates into the flow resistance through ports A and B.

Momentum Balance

The pressure drop is assumed proportional to the square of the mass flow rate. The square of the mass flow rate is linearized in a small laminar flow region near zero flow, resulting in

$p_{A} - p_{B} = K {\dot{m}}_{A} \sqrt{{\dot{m}}_{A}^{2} + {\dot{m}}_{lam}^{2}},$

where:

p_A and p_B are pressures at ports A and B, respectively.
${\dot{m}}_{l a m}$ is the mass flow rate threshold for laminar transition.

K is the proportionality constant,

$K = \frac{Δ p_{n o m}}{{\dot{m}}_{n o m}^{2}},$

where Δp_nom is the Nominal pressure drop parameter value and $\dot{m}$ _nom is the Nominal mass flow rate parameter value.

Ports

Conserving

expand all

A — Flow resistance port
thermal liquid

Port through which the thermal liquid enters or exits the flow resistance.

B — Flow resistance port
thermal liquid

Port through which the thermal liquid enters or exits the flow resistance.

Parameters

expand all

Nominal pressure drop — Pressure drop at a known operating condition
0.001 MPa (default)

Pressure drop from inlet to outlet at a known operating condition. The block uses the nominal parameters to calculate the constant of proportionality between the pressure drop and the mass flow rate.

Nominal mass flow rate — Mass flow rate at a known operating condition
0.1 kg/s (default)

Mass flow rate through the component at a known operating condition. The block uses the nominal parameters to calculate the constant of proportionality between the pressure drop and the mass flow rate.

Cross-sectional area at ports A and B — Flow area at the ports of the flow resistance
0.01 m^2 (default)

Flow area at the ports of the flow resistance. The ports are assumed to be identical in size.

Fraction of nominal mass flow rate for laminar flow — Ratio of threshold to nominal mass flow rates
1e-3 (default)

Ratio of the threshold mass flow rate to the nominal mass flow rate. The block uses this parameter to calculate the threshold mass flow rate—and ultimately to set the limits of linearization for the pressure drop.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced in R2017b

Flow Resistance (TL)

Description

Mass Balance

Energy Balance

Momentum Balance

Ports

Conserving

A — Flow resistance port
thermal liquid

B — Flow resistance port
thermal liquid

Parameters

Nominal pressure drop — Pressure drop at a known operating condition
0.001 MPa (default)

Nominal mass flow rate — Mass flow rate at a known operating condition
0.1 kg/s (default)

Cross-sectional area at ports A and B — Flow area at the ports of the flow resistance
0.01 m^2 (default)

Fraction of nominal mass flow rate for laminar flow — Ratio of threshold to nominal mass flow rates
1e-3 (default)

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

See Also

Topics

Flow Resistance (TL)

Description

Mass Balance

Energy Balance

Momentum Balance

Ports

Conserving

A — Flow resistance port thermal liquid

B — Flow resistance port thermal liquid

Parameters

Nominal pressure drop — Pressure drop at a known operating condition 0.001 MPa (default)

Nominal mass flow rate — Mass flow rate at a known operating condition 0.1 kg/s (default)

Cross-sectional area at ports A and B — Flow area at the ports of the flow resistance 0.01 m^2 (default)

Fraction of nominal mass flow rate for laminar flow — Ratio of threshold to nominal mass flow rates 1e-3 (default)

Extended Capabilities

C/C++ Code Generation Generate C and C++ code using Simulink® Coder™.

Version History

See Also

Topics

A — Flow resistance port
thermal liquid

B — Flow resistance port
thermal liquid

Nominal pressure drop — Pressure drop at a known operating condition
0.001 MPa (default)

Nominal mass flow rate — Mass flow rate at a known operating condition
0.1 kg/s (default)

Cross-sectional area at ports A and B — Flow area at the ports of the flow resistance
0.01 m^2 (default)

Fraction of nominal mass flow rate for laminar flow — Ratio of threshold to nominal mass flow rates
1e-3 (default)

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.