PS Constant Offset Estimator
R2026bMeasure constant offset value of periodic signal
PS Constant Offset Estimator block
To add a block to a model, double-click the canvas and start typing the block name. Then, select the block from the list.
Libraries:
Simscape /
Foundation Library /
Physical Signals /
Periodic Operators
Description
The PS Constant Offset Estimator block measures the constant offset value of a periodic signal.
A signal is periodic if it completes a pattern within a measurable time frame, called a period, and repeats that pattern over identical subsequent periods. The signal base frequency is the number of periods per second.
The constant offset is the amount by which the average value of the periodic signal is not
centered around the t-axis.
Both the input and the output are physical signals. Untyped physical ports facilitate unit propagation. The output signal has the same physical unit as the input signal.
To obtain meaningful results, run the simulation for at least one full time period of the signal.
Ports
Input
Output
Parameters
Programmatic Use: Add Block
To add the block programmatically, use the add_block function with one of these library block paths as the source.
"fl_lib/Physical Signals/Periodic Operators/PS Constant Offset Estimator"
Example: add_block("fl_lib/Physical Signals/Periodic Operators/PS Constant Offset Estimator","myModel/myBlock",MakeNameUnique="on")
For information about programmatic access to individual block parameters, see the Programmatic Use section of parameter descriptions on this page.
