Channel user

Peripheral user who utilizes the event generator trigger on the channel

Since R2023b

Model Configuration Pane: Hardware Implementation / Hardware board settings / Target hardware resources / Event system

Description

Select the peripheral action corresponding to the generator event on the channel.

You can configure event system properties on these hardware boards:

  • Arduino® MKR 1000

  • Arduino MKR Zero

  • Arduino MKR Wi-Fi® 1010

  • Arduino Nano 33 IoT

Dependencies

To enable this parameter, select Enable EVSYS channel for a channel.

Settings

ADC start conversion | ADC flush conversion

  • Default: ADC start conversion — ADC starts an analog to digital conversion after the peripheral generates an event on the event channel.

  • ADC flush conversion — ADC flushes a pending analog to digital conversion. All the conversions in progress are filtered out and lost. After flushing the pending request, ADC resumes from where it left off. If a conversion was pending, ADC starts a new conversion.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2023b