Configure Input registers
Configure input register parameters
Model Configuration Pane: Hardware Implementation / Hardware board settings / Target hardware resources / Modbus properties
Description
Select this parameter to configure the starting address and the number of input registers.
Dependencies
To enable this parameter, set Mode to Server.
Settings
on (default) | offInput Register Parameters
| Parameter | Description | Default Value |
|---|---|---|
Start address | Starting address of the input register Dependencies: To enable this parameter, select Configure Input registers. | 0 |
| Quantity | Number of input registers Dependencies: To enable this parameter, select Configure Input registers. | 1 |
Programmatic Use
| No programmatic use is available. |
Version History
Introduced in R2020b
