ID Range
Matrix of CAN receiver filter identifiers
Since R2024b
Model Configuration Pane: Hardware Implementation / Hardware board settings / Target hardware resources / On-board CAN properties
Description
Specify a matrix of maximum five receiver filter values that compares the received CAN IDs with the corresponding bits of the received CAN message. If the CAN ID matches, the received CAN message is stored in the receiver mailbox. If a mismatch occurs, the CAN message reception is filtered out.
Dependencies
To enable this option, set Hardware board to Teensy 4.0 (Arduino Compatible) or Teensy 4.1 (Arduino Compatible). Select either On-board CAN1 properties, On-board CAN2 properties, or On-board CAN3 properties, and then set Filter configuration to Manual.
Settings
255Default: 255
Programmatic Use
| No programmatic use is available. |
Version History
Introduced in R2024b
