Main Content

Check starting point of internal transition in Stateflow

Check ID: mathworks.jmaab.jc_0760

Guideline: jc_0760: Starting point of internal transition

Description

Identifies if in all state charts and flow charts, internal transitions from state boundaries must start from the left edge of the state.

This check requires a Simulink® Check™ and Stateflow® license.

Check Parameterization

This check does not include sub-checks because the MAB modeling guideline provides only one sub ID.

For reference, the MAB guideline sub ID(s) that are recommended for use by the NA-MAAB and JMAAB modeling standards organizations are:

  • NA-MAAB — a

  • JMAAB — a

Results and Recommended Actions

ConditionRecommended Action
Starting point of one or more internal transitions from state boundaries of state charts or flow charts does not start from the left edge of the state.Make sure that in all the state charts and flow charts, internal transitions from state boundaries must start from the left edge of the state.

Capabilities and Limitations

  • Runs on library models.

  • Analyzes content in masked subsystems. By default, the input parameter Look under masks is set to graphical.

  • Analyzes content of library-linked blocks. By default, the input parameter Follow links is set to on.

  • Allows exclusions of blocks and charts.

Edit-Time Checking

This check is supported by edit-time checking.