Using Absolute Time Temporal Logic in Stateflow Charts
When you use absolute time temporal logic in your Stateflow® Chart blocks in your model for HDL code generation, use these settings.
For the sample rate of the chart:
If you use seconds (
sec), then the sample time must be an integer 65535 or lower, or a decimal between 65.535 and 0.001 with no more than three decimal places.If you use milliseconds (
msec), the sample time must be a decimal between 65.535 and 0.001 with no more than three decimal places, or a decimal between 0.065535 and 0.000001 with no more than six decimal places.If you use microseconds (
usec), the sample time must be a decimal between 0.065535 and 0.000001 with no more than six decimal places, or a decimal between 0.000065535 and 0.000000001 with no more than nine decimal places.If the sample time is an integer below 2^16, then use
sec.If 1000 * sample time is an integer below 2^16, then use
secormsec.If 1000000 * sample time is an integer below 2^16, then use
msecorusec.If 1000000000 * sample time is an integer below 2^16, then use
usec.
