Supported Hardware and Required Software

Supported Hardware

The Communications Toolbox™ Support Package for USRP™ Radio supports Ettus Research™ devices listed in this table and has been tested on devices using Supported Daughter Cards. Support might also extend to other UHD™-based radios and daughterboards from Ettus Research.

National Instruments™ radios equivalent to the listed Ettus Research radios are also supported. For more information, see Mapping Between ER-USRP and NI-USRP Product Numbers.

Radio Series	Comment
USRP2™	—
USRP Bus Series (B200 and B210*)	Collectively referred to in this documentation as B-series.
USRP Networked Series (N210 and N200) from Ettus Research and USRP-292X and USRP-293X Series from National Instruments	Collectively referred to in this documentation as N2xx.
* SISO and 2x2 MIMO modes are supported.

Note

Starting in R2024a, live data I/O support for these National Instruments USRP radios has moved from Communications Toolbox Support Package for USRP Radio to Wireless Testbench™ Support Package for NI™ USRP Radios:

N300
N310
N320
N321
X300
X310

Supported Daughter Cards

These daughter cards are used with USRP2 and N2xx radios. Support might also extend to other UHD-based radios and daughterboards from Ettus Research.

DBSRX
DBSRX2
LFRX
LFTX
SBX
WBX
UBX
TVRX
TVRX2
XCVR2450

Firmware

The blocks and System objects use a specific version of the UHD driver. The FPGA binaries on your USRP radio must match the specific version of the UHD drivers supported by the current release.