设置和配置
Xilinx Zynq 平台的嵌入式目标使您能够:
编译 Simulink® 模型,该模型在 Xilinx Zynq 平台中嵌入的 ARM® Cortex®-A 处理器上加载并运行可执行文件。
使用Supported Features for Xilinx Zynq Platform中所述的功能和特性。
要获得此嵌入式目标,请执行Install Support for Xilinx Zynq Platform中所述的步骤。
函数
zynq | Display most recent IP address, user name, and password |
App
硬件板运行 | 在连接的硬件板上编译、部署和运行模型 (自 R2019b 起) |
模型设置
主题
- Supported Features for Xilinx Zynq Platform
List of supported features for Xilinx Zynq Platform.
- Install Support for Xilinx Zynq Platform
Instructions to install support for Xilinx Zynq platform.
- TFTP/WFTPD Configuration Guide
Set up and configure Trivial File Transfer Protocol (TFTP) or Winsock File Transfer Protocol Daemon (WFTPD) to use with your hardware board.
- Hardware Setup Verification
Description of how the Embedded Coder® Support Package for Xilinx Zynq Platform verifies the setup of the Xilinx Zynq hardware board.
疑难解答
Troubleshooting Xilinx Zynq Platform and Development Computer Connection
To check if the Xilinx Zynq platform is properly configured, repeat the steps in TFTP/WFTPD Configuration Guide.
Configure Network Interface Card (NIC) on Development Computer
Configure a Network Interface Card (NIC) on development computer to connect to hardware board.
Get IP Address of Xilinx Zynq Platform
You can get the IP address of the Xilinx Zynq platform from the MATLAB® Command Window or using the Linux® command line.
Command Line Session with Xilinx Zynq Platform
Open a serial command-line session with Xilinx Zynq platform.
Sending PING Request to Xilinx Zynq Platform
Process to PING an Xilinx Zynq platform connected to your development computer.