Saving as EMF messes up my labels and ticks

Question

CalinV 2015-5-18

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/217368-saving-as-emf-messes-up-my-labels-and-ticks

回答： Maksym Girnyk 2016-2-16

Good day,

I need to save some figures in ".emf" format (best quality & rescaling). The problem is with the label text and with axes ticks, they get shifted in the printed(saved) version. This is a simple example of a figure:

    figure;
    x = -pi:pi/10:pi;
    y = tan(sin(x)) - sin(tan(x));
    plot(x,y,'--rs','LineWidth',2,...
                    'MarkerEdgeColor','k',...
                    'MarkerFaceColor','g',...
                    'MarkerSize',10)
    xlabel('This text should be centered');
    ylabel('This text should be centered');
    title('This text should be centered');

Bellow you can see the figure saved as .jpg, and then as .emf:

As you can see is the second picture (.emf) the labels and ticks are shifted. I would be grateful if anyone could help me solve this issue. Thank you !

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Nalini Vishnoi 2015-5-19

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/217368-saving-as-emf-messes-up-my-labels-and-ticks#answer_179683

编辑：Nalini Vishnoi 2015-5-19

在 MATLAB Online 中打开

Hi Calin,

Are you using MATLAB R2014b? This is a known issue with printing or saving to the EMF format in MATLAB R2014b. It appears that sometimes, saving the figure to a FIG file, restarting MATLAB, opening the FIG file and printing it resolves the issue.

Another work around for this issue is to use "print" command twice as shown in the following lines of code:

>> figHandle = figure;
>> figData = magic(4);
>> plot(figData);
>> legend('Data 1','Data 2','Data 3','Data 4','Location','north');
>> print –dmeta;
>> print (figHandle,'-dmeta','-painters','-r864','dataFigure');

I would also suggest to try it in MATLAB R2015a. The EMF file came out correctly for me in the newer version of MATLAB (R2015a). I hope this helps!

Nalini

2 个评论
显示无隐藏无

CalinV 2015-5-20

Thank you Nalini, both solutions work for me, the "double" printing being useful for my problem where I have to automatically generate and save dozens of pictures. I just hope this problem will be solved with the upcoming matlab release.

Nalini Vishnoi 2015-5-20

You are very welcome! I am glad that the suggestion worked!

Nalini

请先登录，再进行评论。

Answer 2

Maksym Girnyk 2016-2-16

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/217368-saving-as-emf-messes-up-my-labels-and-ticks#answer_210010

A rather silly solution that works for me is to just open an arbitrary fig-file in Matlab. After this printing to an emf-file works as it should, until I close Matlab again.