Unsuccesful binblockread with Tektronix DPO 2014

Question

Wilko ten Hove 2015-11-9

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/253876-unsuccesful-binblockread-with-tektronix-dpo-2014

回答： Vinod 2015-11-20

Hello,

I'm trying to run an experiment but after some time the system crashes. The measurement is performed with at Tektronix DPO2014. The problem seems to be in the binblockread() function. Based on another MATLAB answer I turned the header off. To make sure the terminator character is cleared, I also added a clrdevice(). However, I still get the following error.

Warning: Unsuccessful read: A binblock is not available to be read. 
Warning: Unsuccessful read: A binblock is not available to be read. 
Warning: Unsuccessful read: A timeout occurred before the binblock was read. 
Subscripted assignment dimension mismatch.
Error in measure (line 71)
        RawSignal(:, p) = ymult * (curve - yoff) - yzero;
Error in test (line 16)
        measure

The measure.m script:

% DPO2014 measure
if Test == 1 && Iteration == 1
    dpo2014 = visa('ni', 'USB0::0x0699::0x0373::C010615::INSTR');
    dpo2014.InputBufferSize = 10000000;
    fopen(dpo2014);
      fprintf(dpo2014, 'HEAD %s\n', 'OFF');
  end
if Iteration == 1
    RawSignals = [];
end
% Setup acquisition
fprintf(dpo2014, 'ACQ:MOD %s\n', 'AVE');
fprintf(dpo2014, 'ACQ:NUMAV %d\n', Averages);
fprintf(dpo2014, 'HOR:DEL:MOD %s\n', 'OFF');
fprintf(dpo2014, 'HOR:POS %d\n', 0);
fprintf(dpo2014, 'HOR:RECO %d\n', RecordLength);
RecordLength = query(dpo2014, 'HOR:RESO?', '%s', '%d');
for i = 1 : 4
    fprintf(dpo2014, 'SEL:CH%d?\n', i);
    active = fscanf(dpo2014, '%d');
    if active == 1       
        fprintf(dpo2014, 'CH%d:POS %d\n', [i 0]);
        fprintf(dpo2014, 'CH%d:SCA %d\n', [i 10]);   
    end 
end
fprintf(dpo2014, 'TRIG:A:TYP %s\n', 'EDG');
fprintf(dpo2014, 'TRIG:A:EDGE:SOU %s\n', TriggerSource);
fprintf(dpo2014, 'TRIG:A:EDGE:SLO %s\n', TriggerSlope);
fprintf(dpo2014, 'TRIG:A:LEV %d\n', TriggerLevel);
% Run acquisition
fprintf(dpo2014, 'ACQ:STOPA %s\n', 'SEQ');
fprintf(dpo2014, 'ACQ:STATE %s\n', 'RUN');
% Wait until the acquisition stops
fprintf(dpo2014, '%s\n', '*WAI');
% Fetch waveform
fprintf(dpo2014, 'DAT:ENC %s\n', 'SRI');
fprintf(dpo2014, 'DAT:WID %s\n', 2);
RawSignal = zeros(RecordLength, 2);
p = 1;
for k = 1 : 4
    fprintf(dpo2014, 'SEL:CH%d?\n', k);
    active = fscanf(dpo2014, '%d');
    if active == 1
        channel = sprintf('CH%d', k);
          fprintf(dpo2014, 'DAT:SOU %s\n', channel);
          fprintf(dpo2014, 'DAT:STAR %d\n', 1);
          fprintf(dpo2014, 'DAT:STOP %d\n', RecordLength);
          fprintf(dpo2014, '%s\n', 'CURVE?');
          curve = binblockread(dpo2014, 'int16');
          clrdevice(dpo2014);
          ymult = query(dpo2014, 'WFMO:YMU?', '%s', '%e');
          yoff  = query(dpo2014, 'WFMO:YOF?', '%s', '%e');
          yzero = query(dpo2014, 'WFMO:YZE?', '%s', '%e');
          RawSignal(:, p) = ymult * (curve - yoff) - yzero;
          p = p + 1;
      end
  end
RawSignals = [RawSignals; RawSignal];
if Iteration == Measurements    
    save(File, 'RecordLength', 'Averages', 'RawSignals')
    clear File RecordLength Average RawSignals    
end
if Iteration == Measurements && Stop == 1    
    fclose(dpo2014);
    delete(dpo2014);    
end