Sending and receiving data continuously between matlab and arduino

6 次查看（过去 30 天）

amir 2016-3-31

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/276340-sending-and-receiving-data-continuously-between-matlab-and-arduino

评论： Orestis Despotidis 2018-1-10

Hello,

I have an application that requires sending a signal from arduino to matlab GUI whenever a button being pressed on the arduino. The signal then trigger a camera on the matlab and start processing. Then by the end of process it sends back a signal from matlab GUI to arduino to trigger a LED. This process should be repeated everytime the button press. However the matlab gui need to be run everytime that i send signal from arduino to matlab. So how can I run the script everytime that press button?

Matlab code:

%Define 'Serial' as arduino port
Serial = serial('/dev/tty.wchusbserial1410');  
% set the baudrate of the signal
set(Serial,'BaudRate',9600);
set(Serial,'Timeout',20);
%Open Serial Port
fopen(Serial);
pause (0.1);
data = char(fread(Serial,1,'schar'))
switch (data)
%Define 'Serial' as arduino port
Serial = serial('/dev/tty.wchusbserial1410');  
% set the baudrate of the signal
set(Serial,'BaudRate',9600);
set(Serial,'Timeout',20);
%Open Serial Port
fopen(Serial);
pause (0.1);
data = char(fread(Serial,1,'schar'))
switch (data)
       case '0'
       set(handles.G,'Value',0,'Enable','On');
       case '1'
  %      pause(2);
          vid1 = videoinput('macvideo', 1,'YCbCr422_1280x720');
          vid2 = videoinput('macvideo', 2, 'ARGB32_1280x960');
    Rest of process .....
        if num1+num2 >=1
        fwrite (Serial, 1)
        end
end

Arduino Code:

void skipped()
{
  if (Serial.available ()>0)
  {
    matlabData=Serial.read();
    if (matlabData == 1 )
 digitalWrite (led3, HIGH);
    }
  }

2 个评论
显示无隐藏无

VINOD SUKHADEVE 2017-7-24

I am having the similar type of problem..but not get any solution yet..

If you succeed in doing this, then please mail me at vin3yasukhadeve@gmail.com

Orestis Despotidis 2018-1-10

I am doing my thesis and i am having the same problem, so if you guys came up with any solution please help me, I would really appreciate it a lot. My mail is tsitsaka@gmail.com Thank you in advance!!

请先登录，再进行评论。

请先登录，再回答此问题。