Frequency spectrum of a sound signal

27 次查看（过去 30 天）
Lok Hua Lee
Lok Hua Lee 2019-10-20
评论： Keira Duffy 2021-9-20
Hi guys, I would like to know some hints on how to plot frequency spectrum of magnitude and phase spectra of an audio signal in both omega and frequency as x-axis parameter (plot separately). Thanks. My code is as below and i'm not sure what's going on.
[y,fs] = audioread('test.wave');
N = length(y);
t = (0:N-1/fs);
n = (0:N-1);
y = y(:,1);
% spectral analysis
w = hanning(N, 'periodic');
[X, f] = periodogram(y, w, N, fs, 'power');
X = 20*log10(sqrt(X)*sqrt(2));
% plot the signal spectrum
figure(1);
subplot(2,1,1);
semilogx(f, X, 'r');
xlim([0 max(f)]);
grid on;
set(gca, 'FontName', 'Times New Roman', 'FontSize', 14);
title('Amplitude spectrum of the signal');
xlabel('Frequency, Cycles/Second');
ylabel('Magnitude, dB');
subplot(2,1,2);
semilogx((2*pi*f), X, 'r');
xlim([0 max(2*pi*f)]);
grid on;
set(gca, 'FontName', 'Times New Roman', 'FontSize', 14);
title('Amplitude spectrum of the signal');
xlabel('Angular Frequency, Radian/Sample');
ylabel('Magnitude, dB');

请先登录，再回答此问题。

回答（1 个）

Kaashyap Pappu
Kaashyap Pappu 2019-10-23
Using a test sound file of my own, I was able to generate the plots attached. The function “audioread” works if the suffix of the sound file name is ‘.wav’ not ‘.wave’.
A similar question has been addressed here.
Hope this helps!
  2 个评论
Lok Hua Lee
Lok Hua Lee 2019-10-23
Thanks for the reply, the following code is what i think should be working fine. But im not sure if the graph should be the same for both frequency and angular frequency?
clear, clc, close all;
[y,fs] = audioread('test.wav');
N = length(y); % Length of vector y, number of samples
Y = fft(y,N); % Fourier transform of y
F = ((0:1/N:1-1/N)*fs); % Frequency vector
w = 2*pi*F; % Angular frequency vector
magnitudeY = abs(Y); % Magnitude of the FFT
phaseY = unwrap(angle(Y)); % Phase of the FFT
figure (1);
subplot(2,1,1);
plot(F, magnitudeY);
grid on;
set(gca, 'FontName', 'Times New Roman', 'FontSize', 14);
xlabel('Frequency, Hz');
ylabel('Magnitude, dB');
title('Magnitude spectrum of sound wave in frequency');
subplot(2,1,2);
plot(w, magnitudeY);
grid on;
set(gca, 'FontName', 'Times New Roman', 'FontSize', 14);
xlabel('Angular Frequency, rad/sample');
ylabel('Magnitude, dB');
title('Magnitude spectrum of sound wave in angular frequency');
figure (2);
subplot(2,1,1);
plot (F, phaseY);
grid on;
set(gca, 'FontName', 'Times New Roman', 'FontSize', 14);
xlabel('Frequency, Hz');
ylabel('Phase angle, radian');
title('Phase spectrum of sound wave in frequency');
subplot(2,1,2);
plot (w, phaseY);
grid on;
set(gca, 'FontName', 'Times New Roman', 'FontSize', 14);
xlabel('Angular Frequency, rad/sample');
ylabel('Phase angle, radian');
title('Phase spectrum of sound wave in angular frequency');
Keira Duffy
Keira Duffy 2021-9-20
When you do magnitudeY = abs(Y); you automatically assumed that it is in decibels but it is not. Dont you need to take the log10 to convert it?

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Vibration Analysis 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by