Help - Smoothing surf plot, reduce surf detail and speed up performance

89 次查看（过去 30 天）
mackhina
mackhina 2020-1-2
评论： mackhina 2020-11-22
Hi everyone
I've got a large 3000x2000 matrix (Z) that represents the depth values for a topogrpahical surface plot. Because of the blurring between colour depth I get a very pixelated, sharp ridge line (see image 1 below). I've applied a medfilt2 and then interp2 to try and smooth out the ridges on the plot. This seems to work, but it's a lot of data points and it's running very slow. Is there a way to reduce the points and smooth the plot?
Z_med = medfilt2(Z, [5 5]);
Z_int = interp2(Z_med);
figure
s = surf(Z_int);
% This gets the best results, but is slow and hard to work with
I've tried plotting less points (every 10th point), but this just resulting in really jagged edges (see image 2), and I'm not sure if the way I did this is right (it doesn't look right)? I've also tried plotting a courser grid, but the way I am doing it is wrong?
% Method 1 - Jagged ridges - Failure
step_plot = filt_plot(1:10:end,1:10:end);
Z_int = interp2(step_plot);
figure
s = surf(Z_int);
% Method 2 - Trying to interp2 for a coarser grid - Doing something wrong here - Fails
X = size(Z_med,1);
Y = size(Z_med,2);
[Xq,Yq] = meshgrid(1:2:X,1:2:Y);
Vq = interp2(X,Y,Z_med,Xq,Yq,'cubic');
figure
surf(Xq,Yq,Vq);
I was hoping to get a smooth plot between depth layers, and plot less points, but not getting the jaggered spikes like below...
Any help would be greatly appreciated!
surf_detail.PNG
surf_detail_02.PNG

请先登录，再回答此问题。

采纳的回答

Mustafa Abu-Mallouh
Have you tried taking a look at the shading function?
Specifically, it sounds like you are looking for the interpolation feature which is set by
shading interp
  1 个评论
mackhina
mackhina 2020-1-3
Awesome! Thanks a lot for your help!
That definitely smoothed the steps and removed the edge pixilation.. The surface plot looks beautiful! Loading is pretty terrible though.
The reduced sampling image has removed the pixels and loads lots faster. Does the job for this purpose! Thanks!
% Original image
figure('Name', 'Surf plot')
s = surface(Z);
set(s,'LineStyle','none');
shading(gca,'interp')
% Reduced sampling image
figure('Name', 'Surf step plot')
t = surface(Z(1:5:end,1:5:end));
set(t,'LineStyle','none');
shading(gca,'interp')

请先登录，再进行评论。

更多回答（1 个）

Deniz Diktas
Deniz Diktas 2020-11-18
Hi,
I am answering your question late in the same year. The rendering of topographical data (in other words, terrain data) is not trivial. Downsampling is the way to go but there are issues with how you do it: you should not leave out arbitrarily selected sample points when downsampling. By arbitrary I even mean regular downsampling. Such sampling may mislead you visually. The correct way to go about this is to render the data depending on the view-point (both camera location and view direction), which is a non-trivial issue. In 2014 I worked on a project for real-time terrain rendering and I can easily say that this is an intermediate or even an advanced topic in real time computer graphics. The main idea is to divide the data into smaller tiles and produce multi-resolution versions of these tiles (downsampling according to certain criteria comes at this stage) and then sending these tiles at appropriate resolutions depending on view-parameters in real-time to the GPU. I wonder if such a rendering is supported in Matlab's mapping toolkit.
Let me know if you want to learn more..
  1 个评论
mackhina
mackhina 2020-11-22
Thanks for the feedback. I went with shading interp combined with downsizing the sample for plotting. e.g. taking every 10th data point.

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Surface and Mesh Plots 的更多信息

标签

产品


版本

R2019b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by