Which SDR platform should I use when I want to implement my custom algorithm running on the FPGA of a USRP E310?

Question

MathWorks Support Team 2020-8-11

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/578038-which-sdr-platform-should-i-use-when-i-want-to-implement-my-custom-algorithm-running-on-the-fpga-of

评论： Neil MacEwen 2020-8-11

采纳的回答： MathWorks Support Team

I would like to implement a Goertzel algorithm on the FPGA part of my USRP E310,

Should the USRP support package (https://www.mathworks.com/hardware-support/usrp.html) be used for this workflow?

请先登录，再回答此问题。

Answer 1

MathWorks Support Team 2020-8-11

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/578038-which-sdr-platform-should-i-use-when-i-want-to-implement-my-custom-algorithm-running-on-the-fpga-of#answer_478024

The USRP support package is not the right SDR platform. The Communications Toolbox provides only I/O support for USRP radios. In other words, customers can send and receive I/Q (complex) samples using the radio, but they cannot target (i.e. program the FPGA or ARM) on the radio.

The Zynq SDR support package (<https://www.mathworks.com/hardware-support/zynq-sdr.html>) should be used. It provides both I/O and targeting workflows

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Neil MacEwen 2020-8-11

A small correction, the USRP Embedded Series Radio support package should be used for the USRP E310 hardware. It contains the same functionality as the Zynq Radio support package.

请先登录，再进行评论。