simulate a markov chain including the absorbing state "death"

You won't always eventually die? While there are ways for that to not happen eventually, usually they are the plot of some movie. And if you DO know some way to avoid that particular absorbing state, you might consider selling the formula. my guess is there would be a few buyers at any cost.

Seriously, all states eventually allow transition into the absorbing state with some non-zero probability, so the long time state of the system would have you always in the absoring state. This is just an expected behavior for such a process.

5 个评论
显示 3更早的评论隐藏 3更早的评论

John D'Errico 2021-1-25

编辑：John D'Errico 2021-1-25

在 MATLAB Online 中打开

At any time state, I would expect if you are not dead already, the probability you will die is very approximately 10%. (Geez, you live in one risky place! Have you considered moving to someplace safer?) I've been married 40 years now. I can't possibly be that much of an outlier. And the last I checked, I think I'm still alive. If I pinch myself, does that work?

Let me look at the expected values for a few time periods out:

P = [1 0 0 0 0;zeros(10,5)];
for i = 1:10
  P(i+1,:) = P(i,:)*T;
end
format short g
P
P =
            1            0            0            0            0
       0.9044       0.0099            0            0       0.0857
      0.81794     0.016168    0.0010464   0.00079101      0.16406
      0.73974      0.02025    0.0025652    0.0017821      0.23566
      0.66902     0.022929    0.0042395    0.0027227      0.30108
      0.60507     0.024652    0.0058927    0.0035198      0.36087
      0.54722     0.025689    0.0074277    0.0041516      0.41551
      0.49491     0.026217    0.0087934    0.0046261      0.46546
      0.44759     0.026358    0.0099668    0.0049625      0.51112
       0.4048     0.026201     0.010942    0.0051823      0.55287
       0.3661     0.025814     0.011723     0.005306      0.59105

Each row of this resulting matrix is the discrete probability distribution you will be in the corresponding state, after that many periods of time. So, after 10 years almost 60% of the time you will be in the absorbing state, given that transition matrix.

You are using a simulation time of 1000 "years". Do you have any idea how unlikely it is to not be in the absorbing state, even after only say 30 such "years"?

We can quickly compute the absorbing state probability after 30, 100, and 1000 time periods as the last element of the corresponding vectors:

>> [1 0 0 0 0]*T^30
ans =
      0.04907    0.0092301     0.007705    0.0023248      0.93167
      
>> [1 0 0 0 0]*T^100
ans =
   4.3257e-05   3.2886e-05   3.4913e-05   8.8373e-06      0.99988

Note that even after 100 years, almost certainly every one of those 100 sims you did will be in the absorbing state.

>> [1 0 0 0 0]*T^1000
ans =
   2.2938e-44   2.9041e-41   3.3015e-41   7.9635e-42            1

I have not looked carefully at the code you show, nor have I verified that it produces consistently the results I have just shown. But what you describe is entirely consistent with my expectations, given that Markov transition matrix.

John D'Errico 2021-1-25

I'm not sure what you are asking. Are you saying that you do not know how to generate a viable transition matrix from data, say from marriage, and death statistics? Or are you talking about a formulation of such a process in the form of a system of ordinary differential equations, where now you would have a death rate, marriage rate, etc., each of which would depend on the state you are currently in.

Sehrish Usman 2021-1-25

Yes the second case you mentioned. I have a transition rate matrix for four states (nonmarried, married, divorced, widow) and each element of this matrix shows the marriage rate, divorce rate, mortality rate etc. depending on age and current state.

I want to simulate the markov model but I need to calculate the transition probability matrix. I was not sure if I can use directly these rates to calculate probability?

I cannot use simple Probability = expm(Q) ........ as the transitons states are more than two for each node.

any idea? I would really appreciate if you have any suggestion.

请先登录，再进行评论。

simulate a markov chain including the absorbing state "death"

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

5 个评论
显示 3更早的评论隐藏 3更早的评论

更多回答（0 个）

另请参阅

类别

标签

Community Treasure Hunt

simulate a markov chain including the absorbing state "death"

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

5 个评论 显示 3更早的评论隐藏 3更早的评论

更多回答（0 个）

另请参阅

类别

标签

Community Treasure Hunt

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

5 个评论
显示 3更早的评论隐藏 3更早的评论