Have multiple axes nested within a subplot

Question

Noah Leonardo 2021-7-8

1
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/875053-have-multiple-axes-nested-within-a-subplot

回答： Avni Agrawal 2024-2-14

I am trying to have a loop which adds 16 subplots (4,4) to a figure. Alongside each figure I want two seperate axes to be nested within the plots each plot for a total of 16 subplots and 32 sub-subplots.

I basically want each subplot to look like this:

cpDisplay = figure;
x = linspace(0,30);
x1 = sin(x/2);
x2 = cos(x/3);
x3 = sin(2*x/5);
tmpsub = axes;
plot(tmpsub,x1);
ax2 = axes('Position',[tmpsub.Position(1)*5.5,tmpsub.Position(2)*6.5,tmpsub.Position(3)/5,tmpsub.Position(4)/4]);
plot(ax2,x2)
ax3 = axes('Position',[tmpsub.Position(1)*1.5,tmpsub.Position(2)*6.5,tmpsub.Position(3)/4,tmpsub.Position(4)/4]);
plot(ax3,x3)

If I try and impliment a tiledlayout with this code it does not run an error; however, the sub-subplots aren't visible and after the second iteration the whole figure resembles the top picture:

cpDisplay = figure;
x = linspace(0,30);
x1 = sin(x/2);
x2 = cos(x/3);
x3 = sin(2*x/5);
tiledlayout(4,4);
for qqq=1:16
tmpsub = nexttile;
plot(tmpsub,x1);
ax2 = axes('Position',[tmpsub.Position(1)*5.5,tmpsub.Position(2)*6.5,tmpsub.Position(3)/5,tmpsub.Position(4)/4]);
plot(ax2,x2)
ax3 = axes('Position',[tmpsub.Position(1)*1.5,tmpsub.Position(2)*6.5,tmpsub.Position(3)/4,tmpsub.Position(4)/4]);
plot(ax3,x3)

2 个评论
显示无隐藏无

David 2022-1-21

编辑：David 2022-1-21

在 MATLAB Online 中打开

An important concept is that the axes don't nest -- they are all first level children of the containing figure, and need their positions defined in terms of the figure, not other/parent axes.

Maybe initialize a row of tile handles, and then cycle through them:

cpDisplay = figure(1);
clf
x = linspace(0,30);
x1 = sin(x/2);
x2 = cos(x/3);
x3 = sin(2*x/5);
tiledlayout(4,4);
for qqq=1:16;
    th(qqq) = nexttile;
end;
for qqq=1:16;
    tmpsub = th(qqq);
    ax(qqq)=plot(tmpsub,x1);
end;
for qqq=1:16;
    tmpsub = th(qqq);
    ax2 = axes('Position',[tmpsub.Position(1)*5.5,tmpsub.Position(2)*6.5,tmpsub.Position(3)/5,tmpsub.Position(4)/4]);
    plot(ax2,x2)
    ax3 = axes('Position',[tmpsub.Position(1)*1.5,tmpsub.Position(2)*6.5,tmpsub.Position(3)/4,tmpsub.Position(4)/4]);
    plot(ax3,x3)
end;

I didn't do the sub-position offset math, so I think the sub-sub-plots all end up stacking on top of each other:

Here's some matrix sub-plot positioning math:

for qqq=1:16;
    tmpsub = th(qqq);
    % left bottom width height
    p=tmpsub.Position;
    %ax2 = axes('Position',[tmpsub.Position(1),tmpsub.Position(2),tmpsub.Position(3)/5,tmpsub.Position(4)/4]);
    ax2 = axes('Position',p.*[1 1 .2 .25]+[p(3:4).*[.2 .25] 0 0]);
    plot(ax2,x2)
    ax3 = axes('Position',p.*[1 1 .2 .25]+[p(3:4).*[1-.2 1-.25] 0 0]);
    %ax3 = axes('Position',[tmpsub.Position(1)*1.5,tmpsub.Position(2)*6.5,tmpsub.Position(3)/4,tmpsub.Position(4)/4]);
    plot(ax3,x3)
end;

and:

Danylyna Shpakivska 2023-1-24

thank you!

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Avni Agrawal 2024-2-14

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/875053-have-multiple-axes-nested-within-a-subplot#answer_1408278

在 MATLAB Online 中打开

Hi Noah,

I understand that you want to plot multiple axes nested within the subplot. The `tiledlayout` function creates a grid of plots with consistent spacing, but when you add nested axes using the `axes` function, you must specify the position manually.

Here is an example code that creates a figure with 16 subplots, and within each subplot, it adds two nested sub-subplots. The positions of the nested axes are calculated relative to the parent subplot. Note that the factors used to adjust the position of the nested axes may need to be fine-tuned based on your figure's size and desired layout.

cpDisplay = figure;

% Create a 4x4 tiled layout

t = tiledlayout(4, 4);

% Data for plotting

x = linspace(0, 30);

x1 = sin(x/2);

x2 = cos(x/3);

x3 = sin(2*x/5);

% Loop through each tile and create subplots

for qqq = 1:16

% Create main subplot

tmpsub = nexttile(t);

plot(tmpsub, x, x1); % Plot x1 in the main subplot

% Calculate positions for the nested subplots relative to the main subplot

% Adjust these values as needed to avoid overlap and to fit within the main subplot

mainPos = get(tmpsub, 'Position');

ax2Pos = [mainPos(1) + mainPos(3) * 0.5, mainPos(2) + mainPos(4) * 0.5, mainPos(3) * 0.4, mainPos(4) * 0.4];

ax3Pos = [mainPos(1) + mainPos(3) * 0.5, mainPos(2), mainPos(3) * 0.4, mainPos(4) * 0.4];

% Create nested subplots and plot data

ax2 = axes(cpDisplay, 'Position', ax2Pos);

plot(ax2, x, x2); % Plot x2 in the first nested subplot

ax3 = axes(cpDisplay, 'Position', ax3Pos);

plot(ax3, x, x3); % Plot x3 in the second nested subplot

% Format the nested subplots if needed (e.g., remove ticks and labels)

set(ax2, 'XTick', [], 'YTick', [], 'Box', 'on');

set(ax3, 'XTick', [], 'YTick', [], 'Box', 'on');

end

% Adjust the layout to prevent overlap of nested axes with main axes

t.TileSpacing = 'compact';

t.Padding = 'compact';

I hope this helps!

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

Have multiple axes nested within a subplot

2 个评论
显示无隐藏无

回答（1 个）

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

另请参阅

类别

标签

Community Treasure Hunt

Have multiple axes nested within a subplot

2 个评论 显示 无隐藏 无

回答（1 个）

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

另请参阅

类别

标签

Community Treasure Hunt

2 个评论
显示无隐藏无

0 个评论
显示 -2更早的评论隐藏 -2更早的评论