Legacy 1-Wire Add-On Library for Arduino

Communicate with 1-Wire devices connected to Arduino hardware in MATLAB
3.6K 次下载
更新时间 2019/5/22

查看许可证

This add-on is supported for MATLAB R2016a - R2018b.

This add-on extends MATLAB Support Package for Arduino Hardware to read from and write to 1-Wire devices. With the add-on, you can reset the device, read or write a single byte or multiple bytes from or to the device and also check the data integrity using either CRC8 or CRC16 algorithm.

Sample usage:
-------------------
% Create arduino object with the add-on library
a = arduino('COM38', 'Uno', 'Libraries', 'PaulStoffregen/OneWire');
% Create 1-Wire object
sensor = addon(a, 'PaulStoffregen/OneWire');
% Obtain sensor ROM address
addr = sensor.AvailableAddresses{1};
% Reset sensor
reset(sensor);
% Write to sensor
write(sensor, addr, 72, 1) % parasite power on
% Read 9 bytes from sensor
read(sensor, addr, 9)
% Check CRC of received data
checkCRC(sensor, [1 2 3 4], 56, ‘crc8’)

It includes documentation and an example that demonstrates the use with a DS18B20 temperature sensor and DS2431 1024-bit EEPROM.

Important: Before using this add-on library in MATLAB, you need to install the OneWire Arduino library. Here are the instructions:
1. Download the zip file from https://github.com/PaulStoffregen/OneWire/archive/v2.3.2.zip
2. Unpackage the zip into local directory and rename the folder to ‘OneWire’.
3. Move the ‘OneWire’ folder into the "libraries" folder inside your Arduino sketchbook folder:
On Windows, the default path is "My Documents\Arduino\libraries\"
On Mac, the default path is "~/Documents/Arduino/libraries/"
On Linux, the default path is "/home/<username>/Arduino/libraries"

Troubleshooting tips:
1. After installing this add-on library and the required Arduino library, type "listArduinoLibraries" in MATLAB to see if the add-on is properly installed.
2. Wire up the Arduino board and the add-on device properly before creating the object to avoid a connection error in MATLAB.
3. Refer to the documentation for details on usage and syntax. It can be found under Supplemental Software in the product documentation.

Feel free to contact the MATLAB Hardware Team if you have questions about this add-on library:
http://www.mathworks.com/matlabcentral/profile/contact/4922363-mathworks-matlab-hardware-team

引用格式

MathWorks MATLAB Hardware Team (2024). Legacy 1-Wire Add-On Library for Arduino (https://www.mathworks.com/matlabcentral/fileexchange/57897-legacy-1-wire-add-on-library-for-arduino), MATLAB Central File Exchange. 检索来源 .

MATLAB 版本兼容性
创建方式 R2016a
兼容 R2016a 到 R2018b 的版本
平台兼容性
Windows macOS Linux
类别
Help CenterMATLAB Answers 中查找有关 Instrument Control Toolbox 的更多信息

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

+arduinoioaddons/+PaulStoffregen

版本 已发布 发行说明
1.2.1

Added Legacy to title

1.2

Updated description and release compatibility to specify that the library is only supported for releases through R2018b.

1.1

Added license addendum and replaced http references.
Updated description

1.0.0.0