已回答
MUSIC algorithm ghost target in Matlab Radar Simulation Demo
The range angle image you mentioned in question is not a mirrored target, rather it's just an aliasing to the opposite side due ...

5 years 前 | 0

已回答
About real time data processing in FMCW RADAR.
You may want to take a look at this example to get some idea on how to process real time data. https://www.mathworks.com/help/p...

5 years 前 | 0

已回答
Matlab range and angle
I didn't quite understand what you mean by position = d.*t but rangeangle() support vectorization so you should be able to pa...

5 years 前 | 0

已回答
MUSIC algorithm for direction of arrival
Generally speaking MUSIC belongs to subspace method. It doesn't really compare amplitude or phase, instead it takes advantage of...

5 years 前 | 0

| 已接受

已回答
Radar Doppler Signals for Car dataset!!
What is your requirement? Do you have any specific motion you want to cover? For a generic model, you can consider using many po...

5 years 前 | 0

已回答
Collector for array formed of replicated subararrays
They do consider the gain at different angles. As to the input, you may want to check with your setting in array. Did you turn ...

5 years 前 | 0

| 已接受

已回答
matlab which filtfilt function handles filter objects
The filtfilt that handles a filter object will be a method on the filter object. For example, you can find filtfilt() method in ...

5 years 前 | 1

| 已接受

已回答
Building Radar Data Cube
For FMCW, after phased.ReceiverPreamp, that's the raw signal. You will need to mix it with the transmitted signal and then do an...

5 years 前 | 0

已回答
How to get received signal at the carrier when use Phased Array ToolBox
Phased Array System Toolbox models the signal as a complex baseband representation. Normally a signal occupies certain bandwidth...

5 years 前 | 0

已回答
Phased.RadarBackScatteringTarget be used in bistatic configuration
Bistatic and monostatic RCS is a bit different in the sense that bistatic RCS not only depends on the incident angle, but also d...

5 years 前 | 0

已回答
LinearFM Target Range Detection with Matched Filter Error
You forgot to set the sample rate in channel accordingly. Replace your channel definition as channel = phased.FreeSpace('Propag...

5 years 前 | 1

| 已接受

已回答
Beamforming using custom phases for each array element.
Like you said, you can use custom tapering on elements. Just convert the phase to the corresponding complex number and specify i...

5 years 前 | 0

已回答
phased.freespace channel multiple targets
What are dimensions of your inputs to the object? You may need to match the number of input signal to number or targets. HTH

5 years 前 | 0

已回答
how to simulate radar echo signal with time delay and doppler shift?
These examples in Phased Array System Toolbox mahy be a good start. https://www.mathworks.com/help/phased/examples/designing-a-...

5 years 前 | 1

已回答
generating matched filter for a rectangular pulse waveform
In general matched filter is the conjugated time reversal of the waveform, like y = conv(x,conj(flip(x))) HTH

5 years 前 | 0

| 已接受

已回答
How to save the previous figure generated by function'step(H,x)'
The constellation diagram is workig as expected. The object enables you to overwrite the plot over time so you can see how the c...

5 years 前 | 0

已回答
How can I get the phase of a ConformalArray
Could you elaborate what you mean by having steering vector as an input? In your pattern() call, the steering vector (I assume t...

5 years 前 | 0

已回答
Shnidman’s equations
In this case you can use shnidman to compute the SNR as a functionof N and then plot it manually, e.g. N = 1:50; Pd = 0.98; P...

5 years 前 | 0

| 已接受

已回答
Can I use my own model in "trackingimm"
Yes you can. You need to provide your own motion model update/measurement functions as well as a function switching the state be...

5 years 前 | 1

| 已接受

已回答
2D beamforming simulation
First of all, I don't think elevation is changing. This plot is in spherical coordinates, so the surface is curved, but the colo...

5 years 前 | 0

已回答
Delay-Sum Beam-forming
The following page contains some relevant information and can be a good starting point. https://www.mathworks.com/help/phased/b...

5 years 前 | 0

已回答
How to model a rotating target ?
The following example may give you some ideas. https://www.mathworks.com/help/phased/examples/introduction-to-micro-doppler-ef...

5 years 前 | 0

已回答
Antenna Toolbox Directivity Appears To Saturate
Your array has more than 100 thousand elements so it's very large. Therefore, the calculation probably missed the narrow beam. A...

5 years 前 | 0

已回答
How can I find the incident angle of a 4x4 array that is divided from 1 Tx and 1 Rx channel using Phased Array Toolbox?
If all you care is just this 4x4 array, then you may just want to use a regular URA. It's not clear why you opt in a Partitioned...

5 years 前 | 0

已回答
phased array toolbox.
Yes this can be done. You can look at some examples in following pages to see how to transmit and receive with steering https:/...

5 years 前 | 0

已回答
How to add regular sine wave in phased array toolbox?
Could you clarify your use case? Although there is no regular sine in Phased Array System Toolbox, but you can use sin() functio...

5 years 前 | 0

已回答
How can I use replicated subarrays and still set individual taper and phases?
If you set SubarraySteering to Custom, it means you want to control each element individually, thus you need to provide a weight...

5 years 前 | 0

| 已接受

已回答
How to introduce phase error into phased array
You can do somethign like this to simulate a phase error uniformly distributed within +/- 2.5 degrees in each element. pherr_de...

5 years 前 | 0

已回答
phased array mag2db
Thanks for the suggestion, we will look into this.

5 years 前 | 0

已回答
How can i fix this problem "Undefined function 'Taylor' for input arguments of type 'double'."
Looks like you are using a function from the book so you may want to find the function from the disc or download. You should als...

5 years 前 | 0