Naman Chaturvedi

MathWorks

自 2018 起处于活动状态

Followers: 0 Following: 0

Application Support Engineer at Mathworks India Pvt. Ltd.

Any comment made here is solely my opinion and owned by me. Mathworks is not responsible for whatever I say.

统计数据

查看徽章

Feeds

已回答
Apply a colored filter on grayscale image?
You grayscale image (say iRed) is a m*n*1 matrix. (m, n are x and y dimensions). To make the grayscale image iRed to redscale im...

5 years 前 | 0

| 已接受

已回答
How can i change the step input to cubic polynomial curve in simulink
PFA. I made 45(t^3)/125 signal. Hope this helps.

5 years 前 | 0

已回答
Doubt regarding processing of Upsampling and Downsampling Data in an Image.
Theoritically speaking, yes. You will actually be using just 25% of your original image's data points (50% in x, 50% in y). But ...

5 years 前 | 0

| 已接受

已回答
ECG signal filteration required
You can use the method mentioned in https://www.mathworks.com/help/signal/ug/remove-the-60-hz-hum-from-a-signal.html and use a b...

5 years 前 | 0

已回答
How can i connect simulink and matlab together?
The variables K1-K6 should just be present in the base workspace and Simulink will pull the values from there. If you have a fun...

5 years 前 | 1

已回答
Mesh Plot from Data Points
Hi Garret, To use surf(x,y,z), x, y and z should be matrices of the same size.Also, as you may know, the x, y and z are from th...

5 years 前 | 0

已回答
What will be the specifications for designing 50/60 Hz Analog Low Pass Filter in Simulink?
It really depends on your use case. For instance, Chebyshev filter gives a faster roll-off rate than Butterworth by allowing mor...

5 years 前 | 1

| 已接受

已回答
How to use latin hypercube sampling? Neural network optimization help?
Since your simulation is quite time consuming and you are considering sampling methods as well, I would suggest an approach like...

5 years 前 | 1

已回答
trapz errors in compiled code but not script
From the documentation of trapz(https://www.mathworks.com/help/releases/R2018a/matlab/ref/trapz.html): Q = trapz(X,Y) integra...

5 years 前 | 0

已回答
How to fix remote Matlab display resolution when using ssh -X?
You can try using Painters as a renderer only instead of OpenGL. Use -noopengl flag while opening MATLAB from the command line t...

5 years 前 | 0

已回答
How can I delay a chirp signal for signal processing?
t=1; delay=t*1e3; %delay of 1 seconds z=zeros(1,delay); %delay is the no. of delay samples signal=[z,signal]...

5 years 前 | 1

| 已接受

已回答
I want to detect flowers of two kinds of plants,what kind of features I should extract in such images?
For this particular problem, you can check the standard deviation in all the three color spaces and identify the flower based on...

5 years 前 | 0

| 已接受

已回答
Plot multiple realizations of a Makrov chain in the same plot
<https://www.mathworks.com/help/matlab/ref/hold.html hold on>

5 years 前 | 0

已回答
I use xlswrite and xlswritespec all the time. I am having a specific problem with xlswrite (see below)
Did you make sure that the file is not open? xlswrite() actually launches Excel and tries to open the file. So if you have t...

5 years 前 | 0

| 已接受

已回答
3D axis rotation with meshgrid
You aren't plotting the updated values X and Y. Last line should be:- >> contourf(X,Y,B,25,'LineStyle','none')

5 years 前 | 0

已回答
MATLAB Autoscaling Issue for Constant Numbers
You can use <https://www.mathworks.com/help/matlab/ref/axis.html axis> and <https://www.mathworks.com/help/matlab/creating_plots...

5 years 前 | 0

已回答
Turn off plot confidence bounds
The plot p shows the data, the fit and the confidence handle. The visibility of the confidence bounds lines can be set to 'off' ...

5 years 前 | 1

已回答
chi2pdf WITHOUT using a for loop
Element wise multiplication can be performed using the '.*' operator. So, if you have two matrices say X (n x m) and y(n x m) an...

5 years 前 | 0

已回答
Restore sinusoid signal data
One way would be to find the frequency of the signal from the clean part of the signal by calculating the distance between the f...

5 years 前 | 1

已回答
Is the result from xcorr(zscore(X),zscore(Y), 'coeff') the same as correlation coefficient for each lag position?
Yes, you are correct. It does give the correlation coefficients for the every lag values. By using 'coeff' the following changes...

5 years 前 | 1

| 已接受

已回答
Cell detection and segmentation on image with uneven background and low resolution
Try texture segmentation and then the cell detection and segmentation. Check out <https://www.mathworks.com/campaigns/offers/ima...

5 years 前 | 0

| 已接受

已回答
How to add the strings in three for loops
Correct code: ht=cell(3,1); for i=1:3 for k=1:3 for m=1:3 if (k*m==1) ...

5 years 前 | 0

| 已接受

已回答
FFT Transform on vectors
This should help. For sliding window; % x=signal % A=output array % shift=shift of sliding window % windowlen=w...

5 years 前 | 0

已回答
How i can generate clean %50 duty square waves ?
You can try improving the samples per cycle and making your signal more sharp as long as it obeys the size limits, if you still ...

5 years 前 | 0

已回答
Variable Step between only two values
You can use the sim command to simulate the model from a start time, to a stop time and with a time step. Eg:- If your simulatio...

5 years 前 | 0

| 已接受

已回答
How can I fix this error?
You are getting the error because after performing 'y=diff(y)', y becomes '[]' which makes the RHS '[]' as well. The correct cod...

5 years 前 | 0

已回答
Mux a variable number of signals without mux block
I hope something like this would solve your problem. <</matlabcentral/answers/uploaded_files/131470/mux.png>> I have used ...

5 years 前 | 0

已回答
Combining symbolic integral expressions
Hi Randolf, To check the validity of K==L, you must expand the equation and then simplify it as shown: >> logical(simpli...

5 years 前 | 2

已回答
Can anyone tell me how to calculate this integration using integral2? I am using the below code but not getting the desired result.That is why I want to use integral2.
If f1 is your t_A and x,y your variables, you can use >> F=@(x,y) f1(x,y).*exp(-i*2*pi*(x*u+y*v)/(lambda*f)); >> I=int...

5 years 前 | 0

已回答
How do I plot three waves (sin, triangle, and square) with a Vp-p of 4V and the function generator set at 1KHz
If its MATLAB you want to plot it in, f=1000; t=0:0.00001:0.002; s=2*sin(2*pi*f*t); tr=2*sawtooth(2*pi*f*t); sq=2...

5 years 前 | 0

加载更多