Climb Rate Indicator
R2026bDisplay measurements for aircraft climb rate
Climb Rate Indicator block
To add a block to a model, double-click the canvas and start typing the block name. Then, select the block from the list.
Libraries:
Aerospace Blockset /
Flight Instruments
Description
The Climb Rate Indicator block displays measurements for an aircraft climb rate in ft/min.
The needle covers the top semicircle, if the velocity is positive, and the lower semicircle, if the climb rate is negative. The range of the indicator is from –Maximum feet per minute to Maximum feet per minute. Major ticks indicate Maximum/4. Minor ticks indicate Maximum/8 and Maximum/80.
Tip
To facilitate understanding and debugging your model, you can modify instrument block connections in your model during normal and accelerator mode simulations.
Examples
HL-20 with Flight Instrumentation Blocks
Simulate approach and landing flight phases of NASA HL-20 lifting body and controller using an auto-landing controller.
HL-20 with Flight Instrument Blocks and Visualization Using Unreal Engine
Model NASA HL-20 lifting body and controller modeled in Simulink® and Aerospace Blockset™, using Unreal Engine® for visualization.
Parameters
Programmatic Use: Add Block
To add the block programmatically, use the add_block function with one of these library block paths as the source.
"aerolibhmi/Climb Rate Indicator"
Example: add_block("aerolibhmi/Climb Rate Indicator","myModel/myBlock",MakeNameUnique="on")
Extended Capabilities
Version History
Introduced in R2016a
