Model, Analyze and Compare Horn Antennas

Rectangular Horns

This type of horn antennas has a rectangular shaped waveguide, typically fed by a monopole. In such horns, flaring is done in both E-plane & H-plane walls of the rectangular waveguide. Aperture of the horn is rectangular. The parameters listed below will be used in modeling this type of horn.

FL = Flare Length of the horn

FW = Flare Width of the horn

FH = Flare Height of the horn

L = Length of the waveguide

W = Width of the waveguide

H = Height of the waveguide

For example:

FL = 0.0348;
FW = 0.035;
FH = 0.035;
L = 0.03;
W = 0.024;
H = 0.012;
FO = [0.01 0];
ant1 = horn(FlareLength=FL, FlareWidth=FW, FlareHeight=FH, Length=L,...
    Width=W, Height=H, FeedOffset=FO);
show(ant1)

Conical Horn

This conical horn has a circular shaped waveguide. Aperture of this antenna is circular rather than rectangular with a cone shaped structure coming out of the waveguide. The parameters listed below will be used in modeling this type of horn.

R = Radius of the circular waveguide

WH = Height of the circular waveguide

CH = Height of the cone

AR = ApertureRadius of the cone

For example:

R = 0.012;
WH = 0.03;
CH = 0.0348;
AR = 0.035;
ant2 = hornConical(Radius=R, WaveguideHeight=WH, ConeHeight=CH,...
    ApertureRadius=AR);
show(ant2)

Conical Corrugated Horn

The corrugated horn antenna is like an extension for the conical horn with some additional features. This antenna consists of slots or grooves covering the inner surface of the cone. Typically, such type of horns has 5 to 6 corrugations per wavelength.

z1 = FirstCorrugateDistance, Distance from end of the waveguide to the first corrugate. Corrugations on the surface of the cone start with a metal followed by a groove and repeats itself along the length of the cone. So, the distance is measured from the end of the waveguide to the end of the first groove.

p = Pitch, Distance between two successive corrugations. Number of corrugations can be controlled with this property

w = CorrugateWidth, Width of the groove or corrugation.

d1=CorrugateDepth, Depth of the corrugation. Typically, depth is selected such that it is equal to 0.25 $\lambda$

For example:

z1 = 0.006;
p = 0.0036;
w = 0.0014;
d1 = 0.004;
ar = 0.018;
ch = 0.0348;
ant3 = hornConicalCorrugated(FirstCorrugateDistance=z1, Pitch=p,...
    CorrugateWidth=w, CorrugateDepth=d1, ConeHeight=ch, ApertureRadius=ar);
show(ant3)

Cross sectional view of the corrugated horn:

xlim([0 60]);
zlim([0 10]);
view(-88,35);

Rectangular Corrugated Horn

Rectangular corrugated horn is an extension for horn antenna with corrugations along the width and height of the flare.

FL = Flare Length of the horn

FW = Flare Width of the horn

FH = Flare Height of the horn

L = Length of the waveguide

W = Width of the waveguide

H = Height of the waveguide

FCD = First Corrugate Distance

CD = CorrugateDepth

For example:

FL = 0.0348;
FW = 0.035;
FH = 0.035;
L = 0.03;
W = 0.024;
H = 0.012;
FCD = 0.01;
CD = [0.005 0.0075];
ant4 = hornCorrugated(FlareLength=FL, FlareWidth=FW, FlareHeight=FH, Length=L,...
              Width=W, Height=H, FirstCorrugateDistance=FCD, CorrugateDepth=CD);
show(ant4)

Applications

Horn antennas are widely used in satellite communications as feed antennas in cassegrain, parabolic reflector antennas. These antennas direct the beam towards the reflector. Let us compare the gain provided by these antennas in such applications.

For the cassegrain antenna with the horn as the exciter, analyze the pattern at 10 GHz. Create a PatternPlotOptions object to re-scale the magnitude for the plot.

ant5 = cassegrain;
ant5.Exciter = ant1;
ant5.Exciter.Tilt = 270;
ant5.Exciter.TiltAxis = [0 1 0];
az = 0:2:360;
el = -90:1:90;
patOpt = PatternPlotOptions;
patOpt.MagnitudeScale = [-15 35];
pattern(ant5,10e9,az,el,PatternOptions=patOpt);

For the cassegrain antenna with the hornConical as the exciter,analyze the pattern at 10 GHz

ant5.Exciter = ant2;
ant5.Exciter.Tilt = -90;
figure
pattern(ant5,10e9,az,el,PatternOptions=patOpt);

For the cassegrain antenna with the hornConicalCorrugated as the exciter, analyze the pattern at 10 GHz. The gain provided by the corrugated horn antenna is more compared to other horns due to corrugate depth and pitch of the corrugations which result in lower side lobes.

ant5.Exciter = ant3;
ant5.Exciter.Tilt = -90;
figure
[~] = mesh(ant5,MaxEdgeLength=0.01);
pattern(ant5,10e9,az,el,PatternOptions=patOpt);

For the cassegrain antenna with the hornCorrugated as the exciter, plot the radiation pattern at 10 GHz.

ant5.Exciter = ant4;
ant5.Exciter.Tilt = 270;
ant5.Exciter.TiltAxis = [0 1 0];
figure
pattern(ant5,10e9,az,el,PatternOptions=patOpt);

Conclusion

Horn antennas often have a directional radiation pattern with a higher antenna gain and are relatively easy to manufacture.

References

[1] P. Piksa, "Comparison of conical horn with optimized corrugated surface and corrugated horn," Proceedings of 21st International Conference Radioelektronika 2011, Brno, 2011, pp. 1-3.

[2] R. P. Jadhav, V. Javnrakash Dongre and A. Heddallikar, "Design of X-Band Conical Horn Antenna Using Coaxial Feed and Improved Design Technique for Bandwidth Enhancement," 2017 International Conference on Computing, Communication, Control and Automation (ICCUBEA), Pune, 2017, pp. 1-6.