Generate Deep Learning SI Engine Model

This example uses:

If you have Deep Learning Toolbox™, and Statistics and Machine Learning Toolbox™, you can generate a dynamic (transient) deep learning spark-ignition (SI) engine model using the Virtual Vehicle Composer or the SI engine dynamometer reference application.

Use the deep learning engine model for hardware-in-the-loop (HIL) testing, powertrain control, diagnostics, and estimator algorithm design. For example, from physical hardware or from a high-fidelity model, you can fit a deep learning model to measured engine-out transient emissions data and use it for aftertreatment control and diagnostic algorithm development.

To train the deep learning SI engine model, Powertrain Blockset™ uses a transient SI engine data set with fixed sampling of these data.

Input Data	Output Data
Throttle position (%) Wastegate area (%) Engine speed (RPM) Intake cam advance from park (deg) Exhaust cam retard from park (deg) Spark retard from nominal (deg) Lambda — Air/Fuel ratio, normalized to stoichiometric Air/Fuel ratio	Airflow — Intake air mass flow rate (kg/s) Torque (N·m) Intake manifold gas pressure (Pa) Exhaust gas temperature (K)

Input Data

Output Data

Throttle position (%)
Wastegate area (%)
Engine speed (RPM)
Intake cam advance from park (deg)
Exhaust cam retard from park (deg)
Spark retard from nominal (deg)
Lambda — Air/Fuel ratio, normalized to stoichiometric Air/Fuel ratio

Airflow — Intake air mass flow rate (kg/s)
Torque (N·m)
Intake manifold gas pressure (Pa)
Exhaust gas temperature (K)

Generate Deep Learning SI Engine Model Using SI Dynomometer Reference Application

If it is not already opened, open the reference application.
```
autoblkSIDynamometerStart 
```
Double-click Generate Deep Learning Engine Model. Generating the model can take several hours.
By default, to train the deep learning engine model, the reference application generates design of experiment (DoE) response data from the SI Core Engine block. Alternatively, you can use engine data generated by Powertrain Blockset from Gamma Technologies LLC engine models or other high-fidelity engine models.

Generate Deep Learning SI Engine Model Using Virtual Vehicle Composer

To generate the deep learning engine model for your virtual vehicle:

Start the Virtual Vehicle Composer application. Enter this command in the MATLAB^® Command Window.
```
virtualVehicleComposer 
```
On the Composer tab, click New.
On the Setup pane, select Vehicle class to be Passenger car and select a Powertrain architecture having an SI engine, such as Conventional Vehicle. Set Model template and Vehicle dynamics as desired.
Click Configure. The app will prepare the vehicle data.
On the left side of the Data and Calibration pane, select Powertrain > Engine.
On the Engine tab, select SI Deep Learning Engine.
Click the Calibrate from Data tab.
Select the data source file to use to train your engine model. You can use data acquired by physical testing, or generated by Powertrain Blockset from Gamma Technologies LLC engine models or other high-fidelity engine models.
Click Calibrate to initiate the training. Model generation can take several hours.
- During model generation, the training progress window shows how the deep learning loss function (cost function) varies vs. iterations. You can also stop the training process from this window. When processing is complete, the Stop button turns green.
  Note that the training may stop before reaching its scheduled number of iterations if it reaches its loss tolerance first.
  
  Note that the Powertrain Blockset uses half the data to train the model, and half to test the model.
Once the app has completed training the model, you can view the results in the workspace window under five separate tabs.
- The first is pairwise overlays that show “test versus train dataset input” at steady state. Use these to check that the data used to train and to test the model span the same space, with roughly the same density.
- The next two show the seven engine input signals the deep learning model uses to test its ability to re-create the output responses.
- The next tab checks the model capability. Its four plots each display the test data in blue and the SI engine deep learning model predicted output in red.
- The histograms under the fifth tab display the modeling error distribution for the four engine outputs, under dynamic (transient) conditions. The error is the difference between the response predicted by the deep learning model and the measured test response of the engine.
Continue with the specification of your virtual vehicle in Virtual Vehicle Composer.

Generate Deep Learning SI Engine Model

Generate Deep Learning SI Engine Model Using SI Dynomometer Reference Application

Generate Deep Learning SI Engine Model Using Virtual Vehicle Composer

See Also

Related Topics