数字调制
使用 Communications Toolbox™ 中提供的选项，使这些示例适应各种调制方案。
精选示例
QPSK Transmitter Using Software-Defined Radio
Implement QPSK transmitter using USRP Radio or ADALM-PLUTO radio.
QPSK Receiver Using Software-Defined Radio
Implement QPSK receiver using USRP Radio or ADALM-PLUTO radio.
QPSK Transmitter with ADALM-PLUTO Radio in Simulink
Implement a QPSK transmitter using the ADALM-PLUTO Radio with Simulink®, continuously transmitting indexed 'Hello world' messages at a specified center frequency. The transmitted message can be demodulated using the QPSK Receiver with ADALM-PLUTO Radio model.
QPSK Receiver with ADALM-PLUTO Radio in Simulink
Implement a QPSK receiver using the ADALM-PLUTO Radio with Simulink that addresses wireless communication challenges such as carrier frequency and phase offset, timing offset, and frame synchronization. This model demodulates received symbols from the QPSK Transmitter with ADALM-PLUTO Radio model and outputs messages to the MATLAB® command line.
OFDM Transmitter Using Software-Defined Radio
Design an orthogonal frequency division multiplexing (OFDM) transmitter for a single-input single-output (SISO) channel using a software-defined radio (SDR).
OFDM Receiver Using Software Defined Radio
Design an orthogonal frequency division multiplexing (OFDM) receiver for a single-input single-output (SISO) channel using a software-defined radio (SDR).
