安装和设置
您必须执行以下操作，才能开始使用 Communications Toolbox™ Support Package for Analog Devices® ADALM-Pluto Radio：
按照 安装 Support Package for Analog Devices ADALM-PLUTO Radio 中的说明安装此支持包。
按照引导式主机-无线电硬件设置中概述的步骤建立主机和无线电之间的通信。
函数
findsdr | Status of software-defined radios (SDRs) connected to host computer (自 R2026a 起) |
configurePlutoRadio | Configure ADALM-PLUTO radio firmware |
findPlutoRadio | Report information about attached radios |
sdrdev | Create radio object for specific radio hardware |
类
comm.SDRDevPluto | Create object for Analog Devices ADALM-PLUTO radio |
主题
- 受支持的硬件和必需的软件
获取受支持硬件和必需软件产品的概述。
- 安装 Support Package for Analog Devices ADALM-PLUTO Radio
安装 Communications Toolbox Support Package for Analog Devices ADALM-Pluto Radio。
- Guided Host-Radio Hardware Setup
Follow an automated hardware setup process to establish communication between the host and the radio hardware.
- Manual Host-Radio Hardware Setup
Follow a manual hardware setup process to establish communication between the host and the radio hardware.
- What to Do After Installation
After you have successfully installed the support package, you can do any of the following:
- Setup for Two Radios Connecting to One Host
Set up two radio hardware devices connected to one host computer.
- 卸载支持包
使用“附加功能资源管理器”面板安装该支持包。
疑难解答
Resolve issues encountered while installing or using the features of the support package.
