安装和设置
您必须执行以下操作，才能开始使用 Communications Toolbox™ Support Package for USRP™ Embedded Series Radio：
安装该支持包。请参阅Install Support Package for USRP Embedded Series Radio。
建立主机和无线电硬件之间的通信。请参阅Guided Host-Radio Hardware Setup（仅限 Windows®）或 Manual Host-Radio Hardware Setup。
要使用软硬件协同设计工作流，需安装额外的支持包和第三方工具。请参阅Installation for Hardware-Software Co-Design。
函数
sdrdev | Create radio object for interfacing with USRP embedded series radio hardware |
downloadImage | Download SD card image or bitstream file |
info | Get radio hardware information |
testConnection | Test connection between host and radio hardware |
对象
comm.SDRDevE3xx | Interface with USRP E3xx radio hardware |
主题
- Install Support Package for USRP Embedded Series Radio
Install the support package using the Add-On Explorer.
- Guided Host-Radio Hardware Setup
Follow an automated hardware setup process to establish communication between the host and the radio hardware (Windows only).
- Manual Host-Radio Hardware Setup
Follow a manual hardware setup process to establish communication between the host and the radio hardware.
- Setup for Two Radios Connecting to One Host
Set up two radio hardware connected to the same host.
- Installation for Hardware-Software Co-Design
Install and configure additional support packages and third-party tools required by hardware-software co-design workflow.
- Uninstall Support Packages
Uninstall the support package using the Add-Ons panel.
疑难解答
Resolve issues encountered during installation or while using the I/O mode features of the support package.
Troubleshooting Hardware-Software Co-Design
Resolve issues encountered while using the hardware-software co-design workflow.
