Main Content

Hardware Implementation Pane: Altera Cyclone V SoC Development Kit and Arrow SoCKit Development Hardware Boards

To configure hardware parameters for Altera® Cyclone® V SoC development kit, or Arrow SoCKit development boards, follow these steps:

  1. In the Simulink® Editor, select Simulation > Model Configuration Parameters.

  2. In the Configuration Parameter dialog box, click Hardware Implementation.

  3. Set the Hardware board parameter to Altera Cyclone V SoC development kit and click Apply.

  4. The parameter values under Hardware board settings are automatically populated to their default values.

    You can optionally adjust these parameters for your particular use case.

  5. Click Apply to apply the changes.

For more information on selecting a hardware support package and general configuration parameters, see Hardware Implementation Pane.

Operating system options

ParameterDescription

Base rate task priority

Static priority of base rate task of Simulink model

Detect task overruns

Detection of failure to complete execution of current loop within current time step

Board Parameters

ParameterDescription

Device Address

Device IP address of target hardware

Username

User name for operating system on target hardware

Password

User password for operating system on target hardware

Clocking

ParameterDescription

CPU Clock (MHz)

Frequency of the primary CPU core clock

Build Options

ParameterDescription

Build action

Simulink Coder™ build operation for model

External Mode

ParameterDescription

Communication interface

Transport layer external mode uses to exchange data

Run external mode in a background thread

Execution of external mode task in generated code within background thread

Port

TCP/IP port number of target hardware

Verbose

Verbose status messages for external mode execution progress and updates