Digital Port Read

This port receives the SoC Blockset™ message from the interface blocks and the Digital Port Read block converts the msg into data to be emitted at the output port during simulation.

Dependencies

To view this port, select the Enable simulation port parameter and set the port type as SoC Data (Message based).

The simulation-only signal input port acts as pass-through with the output of the Digital Port Read block during simulation.

Dependencies

To view this port, select the Enable simulation port parameter and set the port type as Signal.

The port outputs the status of the digital pin you select in the Port number and Pin number parameter from Digital Port Read Peripheral Configuration.

The port outputs the status as a logical scalar if the pin number is 1 or as a logical vector if it is greater than 1.

Data Types: Boolean

Select the number of pins (1 to 16) whose output you want to configure in the block.

Specify in seconds how often the block should read the pin value.

When you specify this parameter as -1, Simulink^® determines the best sample time for the block based on the block context within the model.

Select this parameter to enable peripheral simulation capability.

Select this parameter to configure either the SoC compatible or the Simulink signal based simulation ports to enable peripheral simulation capability.

Dependencies

To view this parameter, select the Enable simulation port parameter.