Embedded Coder Support Package for Renesas RH850 Microcontrollers 快速入门

R2026b

安装硬件支持包并确定支持的硬件和软件要求

安装 Embedded Coder^® 软件和第三方软件，如 C Compiler for RH850 (CC-RH)、AUTOSAR RH850/U2Ax MCAL、AUTOSAR RH850/U2Ax MCAL Patch 和 Renesas Flash Programmer（可选）。

安装此软件后，您可以设置模型以使用支持包，并设置与目标硬件的通信。

主题

安装 Embedded Coder Support Package for Renesas RH850 Microcontrollers
按照步骤安装用于 Renesas^® RH850 微控制器建模的硬件支持程序。
Hardware Setup for Embedded Coder Support Package for Renesas RH850 Microcontrollers
Setup, connect to, and configure your hardware boards or devices.
安装后的操作
在安装 Embedded Coder Support Package for Renesas RH850 Microcontrollers 后探索和试验的领域。
Supported Hardware and Required Software
Hardware and software required when using Embedded Coder Support Package for Renesas RH850 Microcontrollers.

MCAL 教程

Configuring MCAL Modules Using DaVinci

configure AUTOSAR MCAL modules using the DaVinci Configurator and generate validated C code for use in embedded applications.

Configure MCAL SPI in DaVinci Configurator

Configure the AUTOSAR MCAL SPI module in Vector DaVinci Configurator for use with the MCAL SPI block.

Getting Started With DIO Using MCAL

Digital Input/Output (DIO) concepts in AUTOSAR MCAL and understand how digital pins are modeled, configured, and accessed in MCAL-based workflows.

Getting Started With DIO Using MCAL

Digital Input/Output (DIO) concepts in AUTOSAR MCAL and understand how digital pins are modeled, configured, and accessed in MCAL-based workflows.

Getting Started with RH850 TSG3

Get introduced to the RH850 TSG3 Motor Control Timer and understand its capabilities, use cases, and role in Simulink-based motor control and power-electronics workflows.

Getting Started with ADC Using MCAL

concepts, configuration model, and usage patterns of the ADC peripheral in MCAL-based workflows.

Pin Configuration for TSG3 and UART Modules in CDD

Understand the pin assignments for TSG3 and UART peripherals.

Baud Rate Configuration for SCI3 and RLIN3 Communication Modules

Configure baud rate settings for SCI3 and RLIN3 serial communication peripherals in the CDD for RH850 targets.

精选示例

Getting Started with MCAL DIO Blocks on Renesas RH850 Microcontrollers

Control a digital output on a Renesas RH850/U2A16 Microcontroller using the AUTOSAR MCAL DIO Channel Write block in Simulink. The example uses an onboard LED to demonstrate how MCAL DIO configuration and model-based design work together to generate, deploy, and run the model on RH850 hardware to drive an LED.

打开实时脚本