CAN Channel

R2026b

CAN hardware channel for XCP on CAN external mode communication

Since R2026b

Model Configuration Pane: Hardware Implementation / Hardware board settings / Target hardware resources / Groups / Host-board connection

Description

Select the CAN channel on the host-side CAN hardware to use for XCP on CAN external mode communication. Some CAN devices have multiple channels, and this parameter identifies which channel to use.

Dependencies

To enable this parameter:

  1. Set Hardware board to one of these boards:

    • Arduino® Due

    • Arduino Uno R4 Wi-Fi®

    • Arduino Uno R4 Minima

    • Arduino Nano R4

    • Teensy 4.0 (Arduino compatible)

    • Teensy 4.1 (Arduino compatible)

  2. Set Communication interface to XCP on CAN.

  3. Set Host interface to Simulink.

    The channel list is filtered based on the selected CAN Device. Changing the device updates the available channels.

Settings

first available channel for the selected device (default) | dynamically populated from connected CAN hardware

Select the CAN channel from the drop-down list. The list shows the available channels on the selected CAN device.

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2026b

See Also

| | (Vehicle Network Toolbox) | | | | |