Check usage of Discrete-Time Integrator block

Check ID: mathworks.jmaab_v6.jc_0627

Guideline: jc_0627: Usage of Discrete-Time Integrator blocks

Checks use of the Discrete-Time Integrator block.

For Discrete-Time Integrator blocks, check if:

Block parameter Limit output is selected.
Saturation limits is defined using a Simulink.Parameter or MPT.Parameter object whose data type is auto.

This check requires a Simulink^® Check™ license.

This check does not include sub-checks because the MAB modeling guideline provides only one sub ID.

For reference, the MAB guideline sub ID(s) that are recommended for use by the NA-MAAB and JMAAB modeling standards organizations are:

Guideline Sub ID	Condition	Recommended Action
jc_0627_a: Check Saturation limit settings of Discrete-Time Integrator blocks	Block parameter Limit output is cleared.	Select the Discrete-Time Integrator block parameter Limit output.

Runs on library models.
Supports exclusions.
Analyzes content of library-linked blocks. By default, the input parameter Follow links is set to on.
Analyzes content in masked subsystems. By default, the input parameter Look under masks is set to graphical.