Main Content

SPDT Switch (Three-Phase)

Three-phase single-pole double-throw switch

expand all in page
  • SPDT Switch (Three-Phase) block

Libraries:
Simscape / Electrical / Switches & Breakers

Description

The SPDT Switch (Three-Phase) block models a three-phase single-pole double-throw switch that uses an external signal to connect each phase of the port ~1 with the corresponding phase of either port ~2 or ~3.

The table shows how the external signal vT controls the block behavior.

ConditionBlock BehaviorResistance Parameter Used
vT ≤ ThresholdEach phase of port ~1 is connected to the corresponding phase of port ~2 via internal resistance. Port ~3 is unconnected.Open conductance (port ~1 to port ~3). Closed resistance (port ~1 to port ~2)
vT > ThresholdEach phase of port ~1 is connected to the corresponding phase of port ~3 via internal resistance. Port ~2 is unconnected.Open conductance (port ~1 to port ~2). Closed resistance (port ~1 to port ~3)

Examples

Three-Phase Asynchronous Machine Starting

Three-Phase Asynchronous Machine Starting

Model a wye-delta starting circuit for an induction machine. When the supply is connected to the machine via switch S1, switch S2 is initially off resulting in the machine being connected in a wye configuration. Once the machine is close to synchronous speed, switch S2 is operated thereby reconnecting the machine in a delta configuration. The higher impedance seen by the supply when the motor is in wye configuration reduces the starting current, and causes less disruption to other connected loads.

Ports

Input

expand all

Physical control port.

Dependencies

To enable this port, set Modeling option to Expanded three-phase ports | PS control port or Composite three-phase ports | PS control port.

Conserving

expand all

Expandable three-phase electrical conserving port.

Expandable three-phase electrical conserving port.

Expandable three-phase electrical conserving port.

Electrical conserving control port.

Dependencies

To enable this port, set Modeling option to Expanded three-phase ports| Electrical control port or Composite three-phase ports| Electrical control port.

Parameters

expand all

Whether to model composite or expanded three-phase ports and physical signal or electrical control ports.

Resistance between ports ~1 and ~3 when the switch is closed.

Conductance between ports ~1 and ~2 when the switch is open.

Threshold voltage for the control port vT. When the voltage is above the threshold, the switch is closed.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced in R2013b

See Also

| | | |

Topics