Three-Phase Custom Transforms
This example shows a comparison of three-phase transforms.
There are four transforms:
Park transform with rotating reference frame
Park transform with stationary reference frame
Park transform with synchronous reference frame
Clarke transform
For more information on each, double-click the block of interest and read the block mask.
Open Model and Set Circuit Parameters
View Results
To view full results, run the simulation, and enter at the MATLAB® command prompt:
sscexplore(CustomTransforms_simlog)
Results from Real-Time Simulation
This example has been tested on these platforms:
Speedgoat™ Performance real-time target machine with an Intel® 3.5 GHz i7 multi-core CPU and 4 GB RAM.
dSPACE® SCALEXIO LabBox with Intel® Core XEON E3-1275v3 at 3.5GHz and 4 GB RAM.
You can run this model in real time with a step size of 30 microseconds by using the Simscape local solver. For small sample rates, a task overrun might occur during the initial task execution due to a cold cache. To avoid this overrun, if the selected platform supports these options, relax the start-up behavior by specifying a limited number of task overruns or increasing the sample time of periodic tasks during the start-up phase of the real-time application.
