Velocity Setpoint
R2026bLibraries:
UAV Toolbox Support Package for ArduPilot Autopilots /
Controller Interface Blocks /
Copter Blocks
Description
Add-On Required: This feature requires the UAV Toolbox Support Package for ArduPilot Autopilots add-on.
The Velocity Setpoint block reads the velocity setpoints (m/s) of the vehicle in the North-East-Down (NED) frame as set by ArduPilot’s guidance system based on the current flight mode.
North (N): Positive direction points toward the North (geographical north).
East (E): Positive direction points toward the East (perpendicular to North, in the horizontal plane).
Down (D): Positive direction points downward, toward the Earth's center (vertical component).
This block supports only ArduCopter vehicle types.
Ports
Output
Parameters
Programmatic Use: Add Block
To add the block programmatically, use the add_block function with one of these library block paths as the source.
"ardupilotCopterlib/Velocity Setpoint"
Example: add_block("ardupilotCopterlib/Velocity Setpoint","myModel/myBlock",MakeNameUnique="on")
Version History
Introduced in R2026a
