MATLAB 帮助中心
Stop transmission from baseband transmitter or transceiver
Since R2022a
stopTransmission(bba)
stopTransmission(bba) stops continuous IQ waveform transmission from the specified baseband transmitter or baseband transceiver bba.
bba
example
collapse all
Create a baseband transmitter object, specifying a radio setup configuration previously saved in the Radio Setup wizard.
bbtx = basebandTransmitter("MyRadio")
bbtx = basebandTransmitter with properties: RadioGain: 10 CenterFrequency: 2.4000e+09 SampleRate: 250000000 Antennas: "RF0:TX/RX"
Set the baseband sample rate and center frequency.
bbtx.SampleRate = 122.88e6; bbtx.CenterFrequency = 2.2e9;
Generate random transmit waveform.
txWaveform = complex(randn(1000,1),randn(1000,1));
Transmit the generated waveform continuously with the radio associated with the baseband transmitter object using the default antenna.
transmit(bbtx,txWaveform,"continuous");
Stop the continuous transmission after 5 seconds.
pause(5); stopTransmission(bbtx);
Create a baseband transceiver object, specifying a radio setup configuration previously saved in the Radio Setup wizard.
bbtrx = basebandTransceiver("MyRadio")
bbtrx = basebandTransceiver with properties: TransmitRadioGain: 10 TransmitCenterFrequency: 2.4000e+09 TransmitAntennas: "RF0:TX/RX" CaptureRadioGain: 10 CaptureCenterFrequency: 2.4000e+09 CaptureAntennas: "RF0:RX2" CaptureDataType: "int16" DroppedSamplesAction: "error" SampleRate: 250000000
Set the baseband sample rate.
bbtrx.SampleRate = 122.88e6;
Set the transmit and capture center frequencies.
bbtrx.TransmitCenterFrequency = 2.2e9; bbtrx.CaptureCenterFrequency = 2.2e9;
Generate a random transmit waveform.
Transmit the generated waveform continuously with the radio associated with the baseband transceiver object using the default transmit antenna.
transmit(bbtrx,txWaveform,"continuous");
Capture IQ data with the radio associated with the baseband transceiver object using the default capture antenna.
[data,~] = capture(bbtrx,milliseconds(3));
Stop the continuous transmission after data capture is complete.
stopTransmission(bbtrx);
basebandTransmitter
basebandTransceiver
Baseband application, specified as a basebandTransmitter object or basebandTransceiver object.
Note
The first object function call in which you specify this object as an input requires a few extra seconds to load the application onto the hardware.
Introduced in R2022a
transmit
You clicked a link that corresponds to this MATLAB command:
Run the command by entering it in the MATLAB Command Window. Web browsers do not support MATLAB commands.
选择网站
选择网站以获取翻译的可用内容,以及查看当地活动和优惠。根据您的位置,我们建议您选择:。
您也可以从以下列表中选择网站:
如何获得最佳网站性能
选择中国网站(中文或英文)以获得最佳网站性能。其他 MathWorks 国家/地区网站并未针对您所在位置的访问进行优化。
美洲
欧洲
亚太
联系您当地的办事处